Laserfiche WebLink
U Orion Pitched Residentiali' Products Date Modified:10/13/2010 <br />Planning Your Orion Installation <br />The installation can be laid out with beams paral- The length of the installation area is equal to: <br />lei to the rafters or perpendicular to the rafters. ·The total width of hte modules, <br />Note that ORION beams make excellent straight ·Plus 1 inch for each space between modules <br />edges for doing layouts. ·Plus 3 inches (1.5 for each pair of end clamps) <br />Center the installation area over the structural <br />members as much as possible. <br />To speed installation, mark beam at approximate <br />proper foot space before clicking connections to <br />beam <br />Leave enough room to safely move around the <br />array during installation. Some building codes <br />require minimum clearances around such instal- <br />lations. The user should be birected to also check <br />'The Code: <br />The width of the installation area equals the <br />length of one module. <br />Peak <br />lilli <br />I 4 1 <br />High-profile - <br />mode <br />Low-profile <br />mode <br />- 7 I -i k <br />1 <br />Gutter <br />Copyright Orion Racking 2010: All information contained in this manual is property of <br />Orion Racking.