Laserfiche WebLink
SOLAR MOUNT PARTS DATASHEETS WAREHOUSE O <br />r re. <br />C' :' 35:ya kri#E-/ <br />1%45.0 <br />4.M <br />Rki·-g. <br />• End clamp material: 6005-T5 extruded aluminum alloysSWH Solar Mount End Clamp <br />. Maximum tensile: 381<si, yield: 35ksi <br />Part No.MR-SW-EC-35, MR-SW-358, MR-SW-EK-40, MR-SW-El<-40B, <br />MR-SW-EF-45, MR-SW-EF-45B, MR-SW-EE-50, MR-SW-EE-508 .Finish: Clear or Black Anodized <br />• Bolt & nut material: 304 stainless <br />BOLT - .End clamp weight: varies based on height: 0.09-0.10 lbs <br />Allowable and design loads are valid when components are <br />assembled according to authorized SWH documentsNUT <br />• Values represent the allowable and design load capacity of a <br />single mid clamp assembly when used with a SWH solar <br />mount rail to retain a module in the direction indicated <br />MODULE <br />• Assemble mid clamp with one 1/4"-20 T-bolt and one <br />W,-20 "-20 ASTM F594 serrated flange nut <br />e Use anti-seize and tight to 10ft-lbs of torque <br />END CLAMP 1/I'll'll'll/:se,I <br />. Ressistance factors and saftey factors are determined <br />according to part 1 section 9 of the 2005 Aluminum Design <br />Manual and third-party test results from an IAS accredited <br />laboratoryRAIL - 7< <br />• Modules must be installed at least 1.5 in from either end of a <br />SWH solar mount rail <br />_ 1.3 % <br />VARIES <br />'Mt™ <br />MO'.KE <br />Y TH[0*ss <br />A <br />-X <br />Dimensions specified in inches unless noted <br />Applied Load Average Allowable Safety Design Resistance <br />Direction Ultimate Load Factor,Load Factor, <br />lbs (N)lbs (N)FS lbs (N) ® <br />Tension, Y+2020 (8987)891 (3963)2.27 1348 (5994)0.667 <br />Transverse, Zi 520 (2313)229 (1017)2.27 346 (1539)0.665 <br />Sliding, X:t 1194 (5312)490 (2179)2.44 741 (3295)0.620 <br />k€.1 /7.4(Iia#WAN,0./.1 <br />SWH Solar Mount Mid Clamp <br />Part No.MR-SW-MC-20, MR-SW-MC-20B <br />j <br />t <br />MID CLAMP <br />MODULES <br />BOLT <br />NUT- <br />RAI L <br />• Mid clamp material: 6005-T5 extruded aluminum alloys <br />• Maximum Tensile: 38ksi, yield: 35ksi <br />• Finish: Clear or Black Anodized <br />• Bolt & nut material: 304 stainless <br />• Mid clamp weight: 0.0096 lbs <br />• Alllowable and design loads are valid when components are <br />assembled according to authorized SWH documents <br />• Values represent the allowable and design load capacity of a <br />single mid clamp assembly when used with a SWH solar <br />mount rail to retain a module in the direction indicated <br />0 Assemble mid clamp with one 14"-20 T-bolt and one 1/4"-20 <br />ASTM F594 serrated flange nut <br />0 Use anti-seize and tight to 10ft-lbs of torque <br />' Ressistance factors and safety factors are determined <br />according to part 1 section 9 of the 2005 Aluminum Design <br />Manual and third-party test results from an IAS accredited <br />laboratory <br />1.00 DESTANCE - -Applied Load Average Allowable Safety Design Resistance <br />BE-fy/e EN MODULE.S Direction Ultimate Load Factor,Loads Factor, <br />lbs (N)lbs (N)FS lbs (N) 0 <br />Tension, Y+1321 (5876)529 (2352)2.50 800 (3557)0.605 <br />Y Transverse, Zi 63 (279)14(61)4.58 21 (92)0.330 <br />Sliding, X+142 (630)52 (231)2.72 79 (349)0.555 <br />- <br />Dimensions specified in inches unless noted <br />.. ..r <br />0 <br />U <br />..