|
October 1,2013 SIGN COMPONENTS MANUAL (SAM) 18
<br />2. These products are intended for use only when connected to a power source that complies 'with Class 2 voltage and energy
<br />limited circuit and is rated greater than 12V DC.
<br />3. These products are each rated max. 0.72 watts per module. When units are connected to a Class 2 circuit, they are not tedraw
<br />a total wattage of greater than the secondary or output rating of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Volts DC or less.
<br />5. These products are not required to be enclosed or protected from the weather in the end product.
<br />6. These products may be secured in place in the end product by any means available.
<br />ALLANSON INTERNATIONAL INC
<br />33 CRANFIELD RD
<br />E251622
<br />TORONTO, ONTARIO, CANADA M4B 3H2
<br />LED Drivers. Models CV14184, CV125, CV144, CV184, CV243 and LC60f2-120 power. supplies, Model ACLGWHO6,
<br />ACLGWHO3 glacier white high output,LED strip, Model ACLCW6, ACLCW3 cool white LED strip, and ModeliACLRR6, ACLRR3
<br />red LED strip.
<br />1. This component has been judged on the basis of the required spacings in the Standard for Class2 Power Units, UL 1310,
<br />Fourth Edition, which would cover the component itself if submitted for Listing.
<br />2. The output terminals are suitable for field wiring
<br />3. The equipment was submitted and tested for a maximum manufacturer's recommended ambient (Tmra) of 40(C.
<br />4. Leakage current measurements shall be performed when more than four LED power supplies are used in the equipment or
<br />when the LED driver is used in combination with other equipment in the end-use product.
<br />5. The ground connection is no.t suitable as the equipment ground for a sign. Separate provision for sign grounding must be
<br />provided.
<br />6. The power supply is suitable for dr'y and damp location use.
<br />7. If the power supply is mounted where wiring can contact the enclosure, tbe wiring shall be rated min. 75° C.
<br />Class 2 LED illuminations, Models ACLW -m R 2@, ACL\AAmG2@, ACLW-m02@, ACLW-RGB@, ACL.W-WHO@, ACLW-
<br />mCW2@, ACLW-mVA/V2@, ACLW-mYZ@, ACLW-m82@.
<br />1. These products are only suitable for connection to a Cfass 2 power source, rated 15 Volt or less.
<br />2..These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage
<br />and energy limited circuit and which is rated greater than 15 V.
<br />3. Class 2 LED Modules Cai Nos. ACLW -m R 2@, ACLW-m02@, ACLW-mO2@, ACLW-RGB@, ACLW-WHO@, ACLW-
<br />mCW2@, ACLW-mVWV2@, ACLW-mY2@, ACLW-mB2@ are each rated max. 3 watts per unit. When units are connected to a
<br />Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output rating o f the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 15 Vor less.
<br />5. These products are not required to be enclosed or protected from the weather in the end product.
<br />1 - Class 2 LED illuminations, Models ACLW-5CW2#, ACLW-5V#12#, ACLW-5R2#, ACLW-5Y2#, ACLW-582#, ACLW-5G2#.
<br />1. These products are only suitable for connection to a Class 2 power source rated 24 Volt DC or less.
<br />2. These products have not beeh evaluated for use when connected to a power source that does not complywith Class 2 voltage
<br />and energy limited circuit and which is rated greater than 24 V DC.
<br />3. These products afe each rated max. 7 watts per module. When units are connected to a Class 2 circuit, they are not to draw a
<br />total wattage of greater than the secondary or output rating of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 24 Volts DC or less.
<br />5. These products are not required to be enclosed or protected from the weather in the end product.
<br />6. These products may be secured in place in the end product by any means
<br />available.
<br />7. When these products ate used in applications other than signs or outline lighting, the need to. conduct a temperature test shall
<br />be considere.d.
<br />LED Drivers, Models LC-1012-120, CV121, LC-12012-120, CV12125, LC-6042-MV, CC2042700MV, CC1042700MV,
<br />DCC2C42700MV, DC€1C42700MV.
<br />' 1. These power supplies have a maximum of two Class 2 outputs. The output of these power:supplies has been evaluated to
<br />i Class 2 output requirements for dc circuits.
<br />2. These products with Class 2 outputs are suitable for use in dry and damp locations.
<br />3. The product was tested for use at the maximum ambient temperature (Tma) of 40 C permitted by the manufacturer·'s
<br />specification.
<br />4. In the end product, power supply spacing to other heat producing components shall be minimum 2 inches spacing to sidewalls,
<br />and minimum 2 inches spacing to top of enclosure.
<br />5. Models DCC2C42700MV and DCC IC42700MV are provided with a Dimming circuit. Dimming of the outputs is by using a
<br />potentiometer. The dimming circuit leads to the potentiometer are considered Class 2.
<br />LED Drivers, Models CV125-MV, CV12125-MV, CV243-MV, CV243-MV-QC and CV243-MV and CV24243-MV.
<br />1. These Class 2 LED power supplies have been evaluated using a resistive load resulting in the electrical rating below.
<br />Input Output
<br />Model V ac Hz A V dc A
<br />CV125-MV 120-277 50/60 0.61 12 5
<br />CV12125-MV 120-277 50/60 1.25 Output 11: 12 Output 1: 5
<br />Output 2: 12 Output 2 5
<br />CV243-MV 120-277 50/60 0.8 24 3.3
<br />CV243-MV-QC 120-277 50/60 0.8 24 3.3
<br />CV24243-MV 120-277 50/60 Output 1: 24 Output 1: 2.5
<br />Output 2: 24 Output 2: 2.5
<br />2. These units are suitable for use in dry and damp locations.
<br />3. These products are intended for use in a maximum 20 A branch circuit.
|