|
October 1, 2013 SIGN COMPONENTS MANUAL (SAM) 38
<br />E-LITE TECHNOLOGIES INC E175045
<br />2285 RESERVOIR AVE
<br />TRUMBULL, CT 06611
<br />Electroluminescent panel base material, designated "E-Lume" and/or "Flatlite" panels.
<br />1. The suitability of this material for use within an electrical sign shall be determined.
<br />2. The suitability of the electrical contacts, with regards to clearance, insulation and lead pull shall be determined in the end-
<br />product.
<br />3. Samples of the lamp material were subjected to the Humidity Conditioning Test in UL 924, with acceptable results.
<br />EASTMAN CHEMICAL CO
<br />BLDG Pl
<br />137 REGIONAL PARK DR
<br />E319574
<br />KINGSPORT, TN 37664
<br />Rigid sign face material non-enclosure rated, designated "Sheet manufactured with Tritan GX 100 (fl ) (Non-White)".
<br />1. (Non-White colors) Acceptable for use in dry, damp and wet locations.
<br />2. (Non-White colors) Limited to only decorative, sign face, and sign body applications. The rigid sign face non-enclosure rated
<br />material is not suitable for use as an electrical enclosure.
<br />3. Minimum 5 cm (2 in) spacing from heat producing components required.
<br />4. Water exclusion must be determined in the end product.
<br />5. Installation and securement of the material into or onto a sign is required.
<br />Rigid sign face material enclosure rated, designated "Sheet manufactured with Tritan GX100 (fl) (Clear and White Only)".
<br />1. (Clear and White only) The product has been investigation for use with all light sources and for Dry, Damp, and Wet Location.
<br />2. (Clear and White only) Suitable for enclosure, sign body and decorative applications. Enclosure applications limited to insulated
<br />live parts.
<br />3. Minimum 5 cm (2 in) spacing from heat producing components required.
<br />4. Water exclusion must be determined in the end product.
<br />5. Installation and securement of the material into or onto a sign is required.
<br />6. (White only) Suitable for use in terminating conduit.
<br />EDGE LIGHT INDUSTRY CO LTD E353017
<br />55 BEIMIN RD
<br />SONGJIANG, SHANGHAI 201611 CHINA
<br />LED Modules, LPS/Class 2 type, Models L E D-ALS- 12\/- 1 W4-3014T-6-590-96, L ED-ALS-24\A l W8-301 4T-6- 11 80-336,
<br />EDGEMAX-LED-ALS-24V-W23(-360-5, AF32A-2900*1050, LED Light Panel, Edgelux, Light Box, Edgemax, AF, LGP, CF, LM,
<br />AF18-1800*1200, AF 18-1800*1000.
<br />1. These LED Modules are only intended for use with a LPS or Class 2 output power sources.
<br />2. These LED Modules are suitable for use in dry and damp locations.
<br />3. These LED Modules are not provided with a mounting means. The suitability is to be determined in end product use.
<br />4. The temperature rating of LED board is 105°C min., of supply leads is 90°C min., and of Light Guide Panel is 50°C min. The
<br />suitability is to be determined in end product use.
<br />5. The suitability of supply means shall be determined in end product.
<br />EGL CO INC E346985
<br />100 INDUSTRIAL RD
<br />BERKELEY HEIGHTS, NJ 07922
<br />LED Arrays, Class 2, Model LEV-1200-XXW, where XX is any numeric digits; Model LEV-600-YYY, where YYY is any alpha
<br />numeric digits to indicate color. 1. These products are only suitable for connection to a Class 2 power source, rated 12
<br />Volts DC or less.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage
<br />and energy limits and which is rated greater than 30 Volt DC or 15 Volt AC.
<br />3. These Class 2 LED modules are rated as below. When units are connected to a Class 2 circuit, they are not to draw a total
<br />wattage of greater than the secondary or output rating of the Class 2 supply
<br />ELECTRICAL RATINGS
<br />Model No. of LED V, DC MA WATTS
<br />LEV-1200-XXW 3 12.0 ---- 1.2
<br />LEV-600-YYY 2 12.0 48 max.0.58 Max.
<br />These products are suitable for use in dry, damp and wet locations.
<br />se products are not required to be enclosed or protected from the weather in the end product.
<br />TECK ENTERPRISE LLC E361431
<br />;0 E WASHINGTON BLVD
<br />LOS ANGELES, CA 90040
<br />Class 2 LED M o d u l e s, E M O I AA, E M 0 2 AA, E M 0 3AA, E M 0 2 BA, E M 0 3 B A, E M 1 3 B A, E M 0 1 C B, E M 0 2 C B, E M 1 3 C B, E M 0 3 C B,
<br />E M 3 3C B, E M 11 CB, E M 1 1 C A E M 1 3 (A, E M01 CA, E M03(A, E M 1 03AA, E M 1 33AA, E M 1 33 BA, E M 1 02 BA, E M 91 B, EM 9 2A,
<br />EM928, EM93A, EM938.
<br />1. These products are only suitable for connection to a Class 2 power source, rated 12 Volt DC or less.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage
<br />and energy limits and which is rated greater than electrical ratings.
|