Laserfiche WebLink
Roof Trac Tilt Up Kit Installation Guide <br />SOLAR MODULES FLAT ROOF <br />E .2 - 1 ,3: <br />1/11 j i t : 1 1 t <br />itti,%1 I <br />4 <br />UPPERTILTASSEMBLY <br />DETAILWITH END CLAMP <br />r <br />4All information in this installation guide (product <br />names and illustrations are proper4 of Professional <br />Solar Products, Inc. Duplication of wholeorin paltis <br />strictly prohibited unless authorized by Professional <br />Solar Products, Inc. <br />TILETRAC ASSEMBLY <br />(Can also be used with Fast Jack) <br />TOOL LIST (WHAT YOU WILL NEED): <br />• 3/16" Drill (Roof Pilot hole) <br />• 3/16" Hex (T-Wrench preferred) <br />• Cordless Impact <br />• 1/4" Drive Socket (hinge bolt connection) <br />The Roof Trac Tilt Up kit is a residential tilt up accessory for <br />the Roof Trac solar PV mounting system. The Tilt up kit inte- <br />grates with both the Tile Trac and the Fast Jack attachment <br />methods (explained in this installation guide). <br />Each Tilt Up kit includes the following parts (comes in boxes <br />of 3 kits): <br />The above tool list is what ProSolar recommends for instal- <br />lation of the Tilt Up kit along with the Tile Trac attachment. <br />For a complete guide to installing the Roof Trac mounting <br />system please refer to the Roof Trac installation manual. <br />3-1" x 1" x 24" square tube, drilled on each end <br />6-Lower (unthreaded)tilt-up brackets-pre tapped <br />3-Upper (threaded)tilt-up brackets <br />3-Upper (hoUow) lower hinge brackets <br />12-5/16" x 2" Stainless Steel socket cap screws <br />6-3/8" x 3/4" Stainless Steel hex bolts <br />12-3/8" Stainless Steel lock washers <br />Each box of tilt up kits contains 3 total kits-so components <br />will be 3x the number of parts listed above. <br />www.RoofTrac.com Page 1professionaISOLARproducts