Laserfiche WebLink
October 1, 2013 SIGN COMPONENTS MANUAL (SAM)110 <br />Model ' Input Voltage ' Max. Max. Current ,Max. # Max. Total Length <br />(Vdc)Wattr 9 1-:s 7VI05A-W3-XXX 24 <br />5. Suitable for Dry or Damp locations. <br />6. Class 2 Input Only. <br />LED Strip Class 2, LINEARIight Flex Series - LF05EP <br />1. These products have been evaluated for use with a suitable Class 2,24 VDC; power source only. <br />2. These products have been evaluated for use in dry and damp locations. <br />3. Thermal spacings shall be provided in accordance with Standard UL 48 or the following tests should be considered in the end <br />use application: Normal Temperature, and Dielectric Voltage Withstand Test. <br />4. The LED strips may be mounted by integral tape or other mechanical means. <br />5. Installation Instructions indicate that the LED Strips may be cut to size in areas marked by straight edge symbol. <br />Class 2 Power Supply, Models OTl OW/350C/120-240V, OTl OW/12V/120-240V and OT25W/12V/UNV. <br />1. The electrical ratings are as follows: <br />| Input, 60 Hz |Output, ac I <br />Model IV A V A VA or Pmax | <br />OT25W/12V/UNV ||85-277 || 0.11-0.3 || 12 || 2.0 |1 25 Pmax I <br />OT10W/12V/120-240V ||120-240|| 0175-0.120 | 12 ||0.833|| 10 VA | <br />OT1 OW/350C/120-240V || 120-240 || 0 175-0.120 ||2.3-28|| 0.350 || 10 VA | <br />2. These power supplies have beenevaluated to Class 2 output requirements for dc circuits with a maximum of one Class 2 <br />output <br />3. A suitable Fire and Electrical Enclosure shall be provided in the end product. <br />4. In the end product, power supply spacing to other heat producing components shall be minimum 2 inches spacing to sidewalls: <br />and minimum 2 inches spacing to top of enclosure. <br />5. These power supplies are only suitable for use in dry and damp locations. <br />Class 2 Power Supply, Model OT60W/12V/UNV. <br />1. Ihese power supplies have been evaluated to Class 2 output requirements for dc circuits with a ma'ximum of one Class 2 <br />output. <br />2. Th6 electrical ratings are as follows: <br />Input, 60 Hz Output, DC <br />Model N v A 1 V VA <br />|OT6OW/12V/UNV | 100 - 277 | 0.8 - 0.3 || 12 || 60 <br />3. These power supplies are only suitable for use In dry and damp locations. <br />4. In the end product, power supply spacing to other heat producing components shall be minimum 2 inches spacing to sidewalls, <br />and minimum 2 inches spacing to top of enclosure. <br />Class 2 LED Module, designated as BA03MA-XXX-YYY and BB03-LA-XXXYYY series, where XXX may be blank or WAF, and <br />YYY may be a combination of any alphanumeric characters. 1. These products are only suitable for connection to a Class 2 <br />power source rated 12 Volt DC or less. <br />2. These products are intended for use only when connected to a power source that complies with Class 2 voltage and energy <br />limited circuits. <br />3. When these units are connected to a Class 2 supply circuit, they are not to draw a total wattage of greater than the secondary or <br />output rating of the Class 2 supply. <br />4. These products are suitable for use in dfy, damp and wet locations. <br />5. These products are not required to be enclosed or protected from the weather in the end. product. <br />6. These products may be secured in place in the end product by any means avajlable. <br />Class 2 LED Module, designated as BX 12BA-VV4F Series. <br />1. These products afe only suitable for connection to a Class 2,24Vdc power source only. <br />2. These products are intended for use only when connected to a power source that complies with Class 2 voltage and energy <br />limited circuits. <br />3. When these units are connected to a Class 2 supply circuit, they are hot to draw a total wattage of greater than the secondary or <br />output rating of the Class 2 supply. <br />4. These products are suitable for use in dry, damp and wet locations. <br />5. These products are not required to be enclosed or protected from the weather in the end product. <br />6. These products may besecured in place in the end product by any means available. <br />Class 2 LED Module, designated as BX06BA-V\MF Series. <br />1. These products are only suitable for connection to a Class 2,24Vdc; power source only. <br />2. These products are intended for use only when connected to a power source that complies ;with Class 2 voltage and energy <br />limited circuits. <br />3. When these units are connected to a Class 2 supply circuit, they are not to draw a total wattage of greater than the secondary or <br />output rating of the Class 2 supply. <br />4. These products are suitable for use in dry, damp and wet locations. <br />5. These products are not required to be enclosed or protected from the weather in the end product. <br />6. These products may be secured in place in the end product by any nieans available. <br />Class 2 LED Strip, LINEARIight Colormix Flex, LF05CA2-RGB3. <br />1. These products were evaluated for connection to a UL Listed or Recognized Component Sign Accessory - UYMR2, Class 2 <br />source. <br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage <br />and energy limiting requirements.