Laserfiche WebLink
Certificate of Compliance (Sign Lighting) <br />Project Name:CREVIER BMW <br />(Page 3 of 4) <br />Date: <br />SLTG-le <br />3-11-2013 <br />4. Maximum Allowed Lighting Power Method of Compliance <br />Certificate of Compliance and Field Inspection Energy Checklist <br />Complete this part if there are signs using the maximum allowed lighting power method of compliance. (Complete part 5 <br />of this Certificate of Compliance if there are signs using the Specific lighting sources method of compliance) <br />A B CDEFGHIJ <br />a Allowed Watts Design Complies? <br />E Watts Y/N <br />> E <br />EE <br />t.0 .= <br />1 0 <br />A. E <br />23 <br />O -9 <br />i el 72 <br />122 <br />= <br />CO E E <br />Es.2 <br />2 X * <br />E W <br />0 204-· <br />ON r.9 <br />3 - 01 <br />2 1111 <br />7 ZE <br />€ <br />0 11 <br />Field <br />Inspector <br />Check that <br />Sign <br />Complies <br />Description 4 <br />0 0 <br />0 0 <br />0 0 <br />0 0 <br />0 0 <br />0 0 <br />A Symbol or code used on the plans (when plans are required) and other documents. <br />B A narrative description of the sign, or location of sign on the building; and the location of sign on construction documents. <br />OPTIONAL - Check this box only if this sign has a permanent, pre-printed, factory-installed, ENERGY VERIFIED label, confirming that <br />the sign complies with the Section 148 of the California 2008 Title 24, Part 6 Standards, using the Maximum Allowed Lighting Power <br />method of compliance. The only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks authorized <br />£ by Underwriters Laboratories (UL) or other Product Certification Body accredited to ISO/IEC Guide 65 by the American National <br />Standards Institute in accordance with ISO/IEC 17011. Surveillance by the Accredited Certification Body shall be an ongoing annual <br />inspection program carried out by a Type A Inspection body in accordance with ISO/IEC 17020. For signs with such an ENERGY <br />VERIFIED label, columns 'D' through 'I' are not required to be filled out. Note: Using an ENERGY VERIFIED label is an optional <br />method to validate compliance. An ENERGY VERIFIED label is not needed for compliance. <br />D The sign area in square feet. <br />E List "I" if the sign is internally illuminated. List "E"ifthe sign is externally illuminated. <br />F Allowed watts per square foot. Enter 12 i f the sign is listed as "I" in column E. Enter 2.3 if sign is listed as "E" in column E. <br />G Multiply the square footage in column D times the allowed Lighting Power Density (LPD = watts) in column F. <br />H Show the total installed watts in the sign, as determined according to the applicable provisions of §130(d or e). <br />I Enter Y if the number in column H is less than or equal to the number in column G. Otherwise, the sign does not comply. <br />J This page doubles as a field inspection checklist. <br />Field Inspector Notes: <br />2008 Nonresidential Compliance Forms October 2010