|
fl¢P1SdjLARMOON¥. Tioh nlidd'I Dataah@et §1 :im UN I RAE
<br />A ·,IL· i te/?Zle C'JAUVi,=··
<br />SolarMount Mid Clamp
<br />Part No. 302101 C, 3021010, 302103C, 30217048,
<br />3021050,302106D
<br />\4 rab©\\glptrt/«f
<br />*EV,\ lili-9 32...
<br />Beam .,P<
<br />Bolt
<br />L
<br />Mid clamp material: One of the following extruded aluminum
<br />alloys: 6005-T5, 6105-T5, 6061-T6
<br />Ultimate tensile: 38ksi, Yield: 35 ksi
<br />Finish: Clear or Dark Anodized
<br />Mid clamp weight: 0.050 lbs (23g)
<br />Allowable and design loads are valid when components are
<br />assembled according to authorized UNIRAC documents
<br />Values. represent the allowable and design load capacity of a single
<br />mid clamp assembly when used with a SolarMount series beam to
<br />refain a module in the direction indicated
<br />Assemble mid clamp with one Unirac W'-20 T-bolt and one W'-20
<br />ASTM F594 serrated flange nut
<br />Use anti-seize and tighten to 10 fi-lbs of torque
<br />Resistance factors and safety factors are determined according to
<br />part 1 section 9 of the 2005 Aluminum Design Manual and third-
<br />party test results from an IAS accredited laboratory
<br />Applied Load |Average Allowable Safety Design Resistance
<br />1.00 DISTANCE -Direction Ultimate Load Factor,Load Factor,
<br />DEr.VEEN MODULES . £lbs (N)lbs (N) FS lbs (N) ®
<br />Y
<br />A
<br />Tension, Y+2020 (8987) 891 (3963)2.27 1348 (5994)0.667
<br />Transverse, Zi 520 (2313)229 (1017)2.27 346 (1539)0.665
<br />Sliding, XIE 1194 (5312)490 (2179)2.44 741 (3295)0.620
<br />,- X
<br />Dimensioris specified in inches unless noted
<br />SolarIViount End Clamp
<br />Part No. 302001 C, 302002C, 302002D, 302003C,
<br />302003D, 302004C, 302004D, 302005C, 302005D,
<br />302006C, 3020060,3020070,302008C, 302008D,
<br />302009C, 302009D, 302010C,i302011 C, 302012C
<br />/loIt
<br />32*4Clamp
<br /> Serrated /<·>»·'
<br />Flange Nut N
<br />Y
<br />.X
<br />t.5
<br />-- ME'.:NOM
<br />...GE
<br />VAR:CS
<br />Wlili
<br />1.ID{>U LE
<br />· End clamp material: One of the following extruded, aluminum
<br />alloys: 6005-T5, 6105-T5, 6061-T6
<br />• Ultimate tensile: 38ksi, Yield: 35 ksi
<br />· Finish: Clear or Dark Anodized
<br />· End clamp weight: varies based on height: -0.058 lbs (26g)
<br />Allowable and design loads are valid when components are
<br />assembled according to authorized UNIRAC documents
<br />· Values represent the allowable and design load capacity of a, single
<br />end clamp assembly when used with a SolarMount series beam to
<br />retain a module in the direction indicated
<br />Assemble with one Unirac W'-20 T-bolt and one 14"-20 ASTM F594
<br />serrated flange nut
<br />Use anti-seize and tighten to 10 ft-lbs of torque
<br />Resistance factors and safety factors are determined according to
<br />part 1 section 9 of the 2005 Aluminum Design Manual and third-
<br />party test results from an IAS accredited laboratory
<br />·, Modules must be installed at least 1.5 in frorn either end of a beam
<br />IlllLA.•L_,
<br />Dimensions specified-irtifialieslifilessrtifted
<br />Applied Load Average Allowable Safety Design Resistance
<br />Direction Ultimate Load Factor,Loads Factor,
<br />lbs (N)lbs (N) FS lbs (N) 0
<br />Tension, Y+1321 (5876) 529 (2352)2.50 800 (3557)0.605
<br />Transverse, Zi 63 (279)14(61)4.58 21 (92)0.330
<br />Sliding, >79 (349)0.555142 (630)52 (231)2.72
<br />9(95.0.4429434*1313*frt**t?'*<ft'}fii)2 it 'iyE-I':(I€21'-4'*..2 . 3 E.Atir}0.-219?'
<br />D
|