Laserfiche WebLink
Guardian Fall Protection <br /> 6305 S. 231st St., Kent, WA 98032 phone: (800) 466 <br />-6385 fax <br />: (800) 670 <br />-7892 <br /> www.guardianfall.com <br />1 <br />Introduction <br />Thank you for purchasing a Guardian Fall <br />Protection CB-18. This manual must <br />be read and understood in its entirety, <br />and used as part of an employee <br />training program as required by OSHA <br />or any applicable state agency. <br />This and any other included instructions <br />must be made available to the user of <br />the equipment. The user must understand <br />how to safely and effectively use the <br />CB-18, and all fall safety equipment <br />used in combination with the CB-18. <br />User Information <br />Date of First Use: <br />Serial #: <br />Trainer: <br />User: <br />Applicable Safety Standards <br />When used according to instruction specifications, this product meets or exceeds all applicable OSHA 1926 <br />Subpart M, OSHA 1910, ANSI Z359.18-2017, and ANSI A10.32-2012 standards for fall protection, depending on <br />application (see below). This product has been tested in compliance with the requirements of <br />ANSI/ASSE Z359.7. Testing only covers hardware and does not extend to the anchorage or substrate to which <br />this product is attached. Applicable standards and regulations depend on the type of work being done, and <br />also might include state-specific regulations. Consult regulatory agencies for more information on personal fall <br />arrest systems and associated components. <br />CB-18 Anchors do not comply with ANSI/IWCA I-14.1-2001 Section 9 requirements for tie-back/suspension <br />anchorages for window washing or facade maintenance equipment. <br />CB-18 Anchors do not comply with CalOSHA section 3291 (f) for roof tie-back/suspension anchorages, which <br />are required on all buildings in California above 36’ (or three stories), with certain rare exceptions. <br />Contact Guardian’s Engineered Services Group (ESG) for more information or for anchors compliant with <br />CalOSHA and/or IWCA standards. <br />PRODUCT COMPLIANCE OSHA 1910 & OSHA 1926 Subpart M ANSI Z359.18 & ANSI A10.32 <br />Wood Installations <br />Metal Installations <br />Concrete Installations <br />YES <br />YES <br />YES YES <br />NO <br />NO <br />Backer Plate Installations YES YES <br />Welding Installations YES YES