Laserfiche WebLink
Vivint Solar - PV Solar Rooftop System Permit Submittal <br />1. Proiect Information <br />Project Name:William Elliot <br />Project Address: 3617 W Kent Ave, Santa Ana CA <br />A. System Description: <br />'1-'he $11·rav corisists of a 4.25 kW DC roof=moun ted Photovoltaic powcr system operating in parallel with [he urility grid. There are (17) <br />250-war.r inodulcs jind (17) 215-wat.I: nticro-inverrers, mounred on the back of ench PV module. The arrity includes (1) PV cii:cuit(s). The <br />array is mounced to the roof using rhe engineered nicking solution from Zep Solar. <br />B. Site Design Temperature: <br />Average 16w temperature: <br />Average high temperature: <br />(From Fullerton Municipal AP weatherstation) <br />0.9 °C (33.62 °F) <br />4019 0C (105.62 99 <br />C. Minimum Design Loads: <br />Ground Snow Load:0 psf (ASCE 7-10(7.2)) <br />Design· Wind Speed:100 mph (ASCII 7-10(26.5.1)) <br />2. Structural Review of PV Arrav Mounting Svstem: <br />A. System Description: <br />1. Roo type: <br />2. Method and type of weatherproofing roo f penctramons: <br />Comp. Shingle <br />Flashing <br />B. Mounting System Information: <br />1. Mounting syst:em is art engineered product designed to mount PV modules <br />21 For maoufactured mounting systems, following information applies: <br />a. Mounzing System Manufacturet:Zep Solar <br />b. Product Name:ZS Comp <br />c. Total Weight of PV Modules and mounting hardware:715.8 lbs <br />d. Total number o f *rachmenc point·s: 25 <br />e. Weight per actachmen.1 point:28.63 lbs/square foot <br />f. Maximum spacing betweeil attachment points: *See attached Zep engineering calcs <br />g. Total suffacc area of PV array:297.98 square feet <br />h. Array pounds per square foot 2.4 lbs/square foot <br />i. Distributed weight of PV array on roof sections: <br />-Roofsaction 1.(8) modules, (9) attachments 37.43 pounds per square foot <br />-Roof section 2 (9) modulcq, (16) ati.u:hmenrs 23.68 pounds per square foot <br />vivint. 3 on-af