Laserfiche WebLink
Vivint Solar - PV Solar Rooftop System Permit Submittal <br />1. Proiect Information <br />Project Name:CHUNG HOANG <br />Project Address: 934 S Gunther St, Santa; Ana CA <br />A. System Description: <br />The array consists of'a 4.25 kW DC root-mounted Photovoitaic power system operating in paralle[ with the utility grid. There are (17) <br />250-watt: mi·>clulcs and (17) 215-watt nnicrc,-itiverters, mounted on the bad: D i each PV module. The array includes (1) PVCirCuit:(S). "1'1 <br />array is niounred to the roof using Ilic engineered racking solution from Zc·p Solar. <br />B. Site Design Temperature: <br />Average low ternperat:ure: <br />Average high temperature: <br />(From Fullerton Municipal AP weatherstation) <br />0.9 °C (33.62 °F) <br />40.9'°C (105.62 °f) <br />C. Minimum Design Loads: <br />Ground Snow Load:0 psf (ASCE 7-10(7.2)) <br />Design Wind Speed:1'00'rnph (ASCE 7-10(26.5.13 <br />2. Structural Review of PV Array Mounting Svstem: <br />A. System Description: <br />1.Roof type: <br />2. Method and cype of weatherproofing roof penetrations: <br />Comp. Shingle <br />Flashing <br />B. Mounting System Information: <br />1. Mounting sysicm is in engineered product designed to mount PV modules <br />2. For manufactured mounting systerns,- following in formation applies: <br />a. Mounting Systb-m Manufacturer:Zep Solar <br />b. Product Name:ZS Comp <br />c. Total Weight of PV Modules,:and mounting hardware:715.8 lbs <br />d. Toial number of alt.achrnent-points: 29 <br />e. Weighr per artachmeric point:24.68 lbs/square foot <br />E Maximum spacing betweeh attachment-points: *See attached Zep engineering calcs <br />g. Total @urface:arcaDEPV acray<297.98 square feet <br />h. Array pounds per squure foot:2.4 lbs/square foot <br />i.Distributed weighr of PV array do roof sections: <br />Roofsection I:(1:5):modules„(23) attachments 27.46 pounds per square foot <br />-Roof section 2 (2) modules, (6) attachments 14.03 pounds per square Tedt <br />a O <br />0