Laserfiche WebLink
www.hilti.com <br />Hilti PROFIS Engineering 3.1.16 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2025 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />8 <br />Company: <br />Address: <br />Phone I Fax: <br />Design: <br />Fastening point: <br /> | <br />250606 - SF Concrete - June 16, 2025 <br />Page: <br />Specifier: <br />E-Mail: <br />Date: <br />8 <br />6/16/2025 <br />6 Installation data <br /> Anchor type and diameter: KWIK HUS-EZ (KH-EZ) <br /> (Carbon Steel) 1/4 (2 1/2) <br /> Profile: - Item number: 418045 KH-EZ 1/4"x2 5/8" <br /> Hole diameter in the fixture: - Maximum installation torque: 216 in.lb <br /> Plate thickness (input): - Hole diameter in the base material: 0.250 in. <br /> Hole depth in the base material: 2.875 in. <br /> Drilling method: Hammer drilled Minimum thickness of the base material: 4.125 in. <br /> Cleaning: Manual cleaning of the drilled hole according to instructions for use is <br /> required. <br /> Hilti Æ 1/4 in KWIK HUS-EZ (KH-EZ) (Carbon Steel) with 2.5 in nominal embedment depth per ICC-ES ESR-3027 , Hammer drill bit installation per <br /> MPII <br />6.1 Recommended accessories <br />Drilling Cleaning Setting <br />• Suitable Rotary Hammer <br />• Properly sized drill bit <br />• Manual blow-out pump • Torque wrench <br />Coordinates Anchor in. <br />Anchor x y c-x c+x c-y c+y <br />1 0.000 0.000 - - - 2.000 <br />24