Laserfiche WebLink
r Installation Manual: MEMC Silvantis 60 cell PV Modules - 7of 15 <br />4.3 MODULE INSTALLATION USING CENTER MOUNTING BRACKETS <br />Modules may also be mounted using center clamps as shown in Appendix 8.2, for use with trackers. <br />Module clamps for center mounting must be based on MEMC approvedextrusion and hardware. <br />For module loads higherthan 2400 Pa, moduleclamps and hardware must be pre-approved by MEMC. <br />4.4 MODULE INSTALLATION USING SHARED RAILS (M240/250/260LMA AND M240/250/260LMC SPECIFIC) <br />Itty«*12E¢f-R44iii--Rts, 41- j,31-24%21*94**kilPORI1 <br />Step 1: Place the bottom of the module on the <br />approved rail at an angle, allowing the module <br />to toe into the rail hookas shown in figure to the <br />right, and loweronto the ledgeof the next rail. <br />1Step 2: Ensure that th erails aretightagainst <br />the modules byadjusting the upper rail.Toeingmodule into rail hook <br />Step 3: Use the moduleclips provided toclamp <br />the module to the rail at each of thetwo upper <br />comets on the module frameas shown in figure <br />to the right. <br />Slep 4. Tighlen Llie included rdble lets ful L e <br />clips to 11.5 Newton·meters (or 8.5 foot pounds <br />oftorque). <br />UI <br />111 / <br />110 <br />Moduleclipattachnient <br />STEP 3 <br />Gro un dibg Cl ip - provides mecha nic.1 a nd r,rounding connection fram mil to module <br />4,241»9*.93 <br />6 k <br />1 1 <br />Comar Cap 4 1 1 i <br />/1 N.Corne,Cap <br />Toe in Modules usihg Corner Cap Feature tE <br />Main Rail <br />· System Overvitt- <br />;\ <br />111 l <br />44 <br />l <br />1/ 1Anhodulo.Eram# i -· <br />M Module Frame <br />© Copyright 20 12 MEMC Electronic Materia I <br />r <br />11