10181240_2510 N. LARCHMONT - Plan (2)

Home Browse Search

Installation Manual: MEMC Silvantis 60 cell PV Modules 4 of 15 1 ca • Keep all electrical contacts clean and dry. • All modules are manufactured with a sealedjunction box and pre-attached cablesand lockihg connectors. These components should not be modified ortampered with in any way. • Do not'allow unauthorized persons near the installation site or storagearea of modules. • Do ndt place modules on topbf one another. • Do not placeany load on the module or twistthe module frame. • Do not stand, step, walk, or jumpen the moduJe. • Do not drop or place objectspn the modules such as tools. • Do not handle modules with bare hands and avoid scratches, handling marks, or anydamage especially to the frontglass of the module, backsheet, or electrical components. • Do not mark the modules with sharp instruments. • Do not leave a module unsupported or unsecured. • Do notmodify module frames in any way. 3.2 SAFETY The following»safetyguidelines and best practices should be followed: • All installations must be performed in compliance withiall applicable regional and localelectrical codes orother national or international electrical standard&. • Use insulated toolsduring installation, troubleshooting and maintenance of photovoltaic modules. • Wearsuitable protection to preventdirectcontact with module's electrical outputand mechanical sharp edges. • Cover the front of the modules with an opaque material to stop production of electricjty when installing or working with a moduleorwiring. • Modules connected in a series should not be disconnected under illumination. Disconnecting modules under illumination may causeelectrical aicing which may result in burns, fires brother problems. • Follow industry best practices when commissioning, trouble shooting, disconnecting, orconnectinga PV system. • Trouble shooting should include planning, checking, disconnecting, cause seeking,replacement, and record keeping. • Dn notinctall nrhanrile themorltilpv nrthpirromponpnt<\Mhen they arp wet Arrltiring pprior·knf high wind • Do notattempt to disassemble, repair, or open any part of the module including junction box or sub-components. • Do not artificially concentrate sunlight on a module. • Do not install or handle any br6ken modules. I f a module is broken, orthe back sheet is torn, contactwith the surface or frame can cause an electrical shock. e Do not wear rings, jewelry, watches, orother metallic items while working with photevoltaic modules.eping. 3.3 MAINTENANCE Checkmodules, glass, and frames for damage. Regularly inspectall MEMC Silvantis S61ar Modules for safeelectrical connections, sound mechanical connections, and freedom from shading and corrosion. If dirt or debris buildup becomes excessive, periodically clean the glass only witb a soft cloth using mild, non-abrasive detergentand water. When using mild cleaning liquids, a neutral pH in the range Of 6.0 to,8.0 is recommended. Chemicals with pH less than 6.0 or greater than 8.0 should be avoided as it may damage the glass surface and or the AR coating. Please consult with system designer to decide the cleaning and inspection frequency ----*tording to local environmental-conditions. Do not power wash or use harsh cleaning materials or objects such as scouting powder, steel wool, scrapers, blades, or,ofher sharp instruments to clean the glass surface o f the module. Use of such materials will ihvalidate the product warranty. WARNING: Use caution when cleaning the back surface of the module to avoid penetfating thesubstrate materials. © Copyright 201 2 MEMC Electronic Marerial It