10278331_1317 S. MAGNOLIA - Plan (2)

Home Browse Search

Prescriptive Certificate of Compliance: Residential Additions Site Address:(16 Il t.KAGAA aL' A . Enforcement Agency: CIr-IR ADD (Page 2 of 5) Dale: • 'l '°1 13 J. For Tag//D indicate the identification name that matches the building plans. 2. Indicate the Assembly Name or type: RoofCeiling, Walls, Floors, Slabs, Crawl Space, Doors and etc...Indicate in column G the Frame material and Size: For Wood, Metal, Metal Buildings, Mass, enter 2x4,2x6, oretc... see JA4 for other possible frame type assemblies, 3. Enter the thickness formass in inches or Spacing betweenframing members enter; 16"or 24"OC, or Other for allotherassembly description such as Concrete Sandwich Panel, Spandrel Panel, Logs, Straw Bale Panel, and etc. 4. Based on the Climate Zone; enter the equivalent U-factor found in JA4 Table based on the R-Value from Table ] 51-C 5. Enter the Table number that closely resembles the proposed assembly. 6. Enter the R-value thatis being installed in the wall cavity or between theframing; otherwise, enter "0" 7. Enter the Continuous Insulation R-valuefor the proposed assembly; otherwise, enter "0" 8. Enter the row and column of the U-factor value based on Column F Table Number and enter the Assembly U-factor in Column J. 9. The Proposed Assembly U-factor, Column J, must be equal to or less than the Standard U-factor in Column E to comply. FURRING STRIPS CONSTRUCTION TABLE FOR MASS WALLS ONLY A B CDEFGHIJK Proposed Properties of Masonry and Concrete Added Interior or Exterior Insulation Walls From Reference in Furring Space from Reference Joint Appendix Table 4.3.5,4.3.6,4.3.7 Joint Appendix Table 4.3.13 L M 3 Assembly Mass Nameor JA4 Table 4 £ Thickness'Typt Number'd> 3g 2.@ ME f? 64 Od 3 U :Final Assembly U-factor,7 Comment 1. Indicate the Mass Thickness from Reference Joint Appendix JA. 2. Indicate the Assembly Name or type: Roof/Ceiling, Walls, Floors, Slabs, Crawl Space, Doors and etc...Indicate the Frame type and Size: For Wood, Metal, Metal Buildings, Mass, enter 2x4,24 or etc.,. see JA4 for other possible frame type assemblies. 3. Enter the Table number that closely resembles the proposed assembly. 4. Enter the row and columnofthe U-factor value. 5. Enter the Effective R-value listed in the JA4 Table Number. 6. The Final Assembly is calculated by using Equation 4-1 or Equation 4-4 ofthe Reference Joint Appendix JA4. Enter the value in Column L 7. Insert the Final Assembly U-factor value back on to the Opaque Surface Details table in Column J. FENESTRATION PROPOSED AREAS Orientation Fenestration Type and Frame (North, East,ProposedArea' Maximum Maximum NFRC or (Window, Glass Door or Skylight)South, West) (ff) U-factor-, 3 SHGC2,3.4 Default Values' 411 Aptuj 4 14 AFfte GL Al f 0136£ A 9 76 Aplt L •3 f AO t UJ e 1 2-AF e £ \A \ Ap 6.0 4 -1 6 AF n_c Total 97 1. Fenestrationareaisthe area of total glazed product (i.e. glassplus frame). Exception: Whenadooris less than 50% glass, thefenestration area may be the glass area plus a "2 inchframe" around the glass. 2. Enter value from Component Package D Requirements in Table 15 1-C. 3. Actualfenestration products installed and as indicated in CF-6R-ENV Form shall be equivalent to or have a lower U-factor and/or a lower SHGC value than that specified on the Fenestration Proposed Area table above. 4. Submit a completed WS-3R Form if a reduced SHGC is calculated with exterior shading. 5. Ifapplicableat thisstage enter "NFRC"for NFRCCertified windows or CEC "Default" values found in Table 1]6-A or B. Registration Number: 2008 Residential Compliance Forms Registration Date/Time:HERS Provider: March 2010