Laserfiche WebLink
Design Results Actual @ Location Allowed Result LDF Load: Combination (Pattern) <br />Member Reaction (lbs)221 @ 2 1/2"2109 (2.25")Passed (10%)--1.0 D + 1.0 L (Alt Spans) <br />Shear (lbs)197 @ 12' 3/4"1305 Passed (15%)1.00 1.0 D + 1.0 L (All Spans) <br />Moment (Ft-lbs)682 @ 6' 5 3/4"1098 Passed (62%)1.00 1.0 D + 1.0 L (Alt Spans) <br />Live Load Defl. (in)0.199 @ 6' 6 1/8"0.420 Passed (L/761)--1.0 D + 1.0 L (Alt Spans) <br />Total Load Defl. (in)0.255 @ 6' 6"0.630 Passed (L/593)--1.0 D + 1.0 L (Alt Spans) <br />TJ-Pro™ Rating N/A N/A N/A --N/A <br />Member Length : 14' 6 1/2" <br />System : Floor <br />Member Type : Joist <br />Building Use : Residential <br />Building Code : IBC 2021 <br />Design Methodology : ASD <br />•Deflection criteria: LL (L/360) and TL (L/240). <br />•Overhang deflection criteria: LL (2L/360) and TL (2L/240). <br />•A 15% increase in the moment capacity has been added to account for repetitive member usage. <br />•Moment capacity has been adjusted by a factor of 0.7 to account for the beam stability and/or volume/size factors. <br />•Applicable calculations are based on NDS. <br />•No composite action between deck and joist was considered in analysis. <br />• Rim Board is assumed to carry all loads applied directly above it, bypassing the member being designed. <br />• Blocking Panels are assumed to carry no loads applied directly above them and the full load is applied to the member being designed. <br />Bearing Length Loads to Supports (lbs) <br />Supports Total Available Required Dead Floor Live Factored Accessories <br />1 - Beam - DF 3.50"2.25"1.50"51 174/-1 225 1 1/4" Rim Board <br />2 - Stud wall - DF 3.50"3.50"1.50"66 221 287 Blocking <br />Lateral Bracing Bracing Intervals Comments <br />Top Edge (Lu)8' o/c <br />Bottom Edge (Lu)End Bearing Points <br />Dead Floor Live <br />Vertical Load Location (Side)Spacing (0.90)(1.00)Comments <br />1 - Uniform (PSF)0 to 14' 7 3/4"16"6.0 20.0 CLG Load <br />Weyerhaeuser warrants that the sizing of its products will be in accordance with Weyerhaeuser product design criteria and published design values. Weyerhaeuser expressly disclaims any other warranties <br />related to the software. Use of this software is not intended to circumvent the need for a design professional as determined by the authority having jurisdiction. The designer of record, builder or framer is <br />responsible to assure that this calculation is compatible with the overall project. Accessories (Rim Board, Blocking Panels and Squash Blocks) are not designed by this software. Products manufactured at <br />Weyerhaeuser facilities are third-party certified to sustainable forestry standards. Weyerhaeuser Engineered Lumber Products have been evaluated by ICC-ES under evaluation reports ESR-1153 and ESR-1387 <br />and/or tested in accordance with applicable ASTM standards. For current code evaluation reports, Weyerhaeuser product literature and installation details refer to www.weyerhaeuser.com/woodproducts/ <br />document-library. <br />The product application, input design loads, dimensions and support information have been provided by ForteWEB Software Operator <br />Weyerhaeuser Notes <br />Drawing is Conceptual. All locations are measured from the outside face of left support (or left cantilever end). All dimensions are horizontal (typ.). <br />MEMBER REPORT PASSED <br />CLG, (N)CJ3 <br />1 piece(s) 2 x 8 DF No.2 @ 16" OC <br />Page 210 of 290