Laserfiche WebLink
<br /> <br />W Park Ln <br /> <br /> U.S. Office: <br />Canada Office: <br />77 Waldorf, Irvine, CA 92612 <br />550 HWY 7, Unit 315, Richmond Hill, ON L4B 3Z4 <br /> +1 949-979-5003 <br />+1 289-597-0455 <br />2 <br />1 Description of the Structure and Site <br />This project is located at 922 W Park Ln, Santa Ana, CA 92706, is an existing one-story residential <br />building. The proposed east elevation of structure is shown in Fig.1. The structural system consists <br />of wood structural frame system with shear wall. <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />Figure 1. The Proposed East Elevation of Structure <br />No geotechnical report was provided. The design of foundation is based on the default value <br />provided in foundation requirements for residential projects and accessory structures dated <br />06/22/2020 by the County of Orange Department of Public Works. For more information, see <br />Appendix A. <br /> <br />2 Design Criteria <br />2.1 Design Codes and Standards <br />For design purposes, the following codes, standards, and local regulations are used: <br /> <br />• California Building Standards Code, (CBC-2022) <br />• California Residential Code, (CRC-2022) <br />• Minimum Design Loads for Buildings and Other Structures, (ASCE/SEI 7-16) <br />• Building Code Requirements for Structural Concrete and Commentary, (ACI318–19) <br />• National Design Specification for Wood Construction, (NDS-2018) <br />• Special Design Provisions for Wind and Seismic, (SDPWS-2021) <br />• Braced Wall Section of CRC for Wind and Seismic at Acceptable Lines. <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />Page 3 of 290