Laserfiche WebLink
<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />This document is a Property of BTCPower Inc. and shall not be <br />copied, reproduced, or used as the basis for sale or manufacture <br />of apparatus without written permission. <br />23-Sep-22 Rev D <br />360kW High Power DC Charger <br />INSTALLATION AND USER’S MANUAL <br />Page 5 of 89 <br />SAFETY GUIDELINES <br /> <br />1. Safety Guidelines <br />SAVE THESE INSTRUCTIONS <br />This document contains important instructions for the installation, operation, and maintenance <br />of 360kW High Power DC Charger. These instructions should be retained for future reference. <br />1.1. Important Safety Instructions <br /> <br />DANGER <br />READ THIS MANUAL BEFORE YOU BEGIN <br />This 360kW High Power DC Charger manages electricity and may be hazardous. The equipment <br />should be installed, adjusted, and serviced only by qualified electrical personnel familiar with the <br />construction and operation of this type of equipment and the hazards involved, and in full <br />compliance with all local and national codes and standards. Failure to observe this precaution <br />could result in severe injury or death. <br />Read this manual completely and become familiar with the equipment prior to performing any <br />procedures specified in the manual and energizing the equipment. Inspection and <br />maintenance of this equipment should be performed in accordance with the procedures <br />detailed in this manual. <br />In situations where it is not possible to perform an installation following the procedures stated in <br />this document, contact BTCPower, Inc. BTCPower, Inc. will not be responsible for any damages <br />that may occur resulting from custom installations that are not stated in this document. <br />There are no user serviceable parts inside. For service, please contact customer service or your <br />local distributor. DO NOT ATTEMPT TO REPAIR THE CHARGE STATION YOURSELF. SERVICE TO THE <br />UNIT SHALL ONLY BE PERFORMED BY A QUALIFIED PERSONNEL. <br />If the charging cable is somehow damaged, do not operate the charge station. Contact your <br />service representative for service immediately. Shut down the power to the tower by switching <br />the breaker on the supply panel to the off position. <br /> <br />