Laserfiche WebLink
<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />360kW High Power DC Charger <br />INSTALLATION AND USER’S MANUAL <br />Page 71 of 89 <br />This document is a Property of BTCPower Inc. and shall not be <br />copied, reproduced, or used as the basis for sale or manufacture <br />of apparatus without written permission. <br />23-Sep-22 Rev D <br /> <br />MAINTENANCE <br /> <br />SCOPE MAINTENANCE WORK INTERVAL <br />Internal Maintenance • Check cooling system conditions <br />o Check all cooling fittings for leaks <br />o Check condenser for any bent or clogged <br />fins <br />o Clean cooling fins if needed (extra care not <br />to bend) <br />o Straighten cooling fins if bent using a fin <br />comb <br />o Ensure cooling fins are secured and not loose <br />o Check coolant level and refill if necessary <br />Annual <br />Performance Testing • Measure Incoming AC Voltage <br />• Perform Interlock Testing <br />• Check if HMI & Nayax touch screen and <br />pushbutton are operating properly <br />• Perform testing on charging cable using <br />Comemso <br />Annual <br /> <br /> <br />Replacement of Fixed-Life Components <br />To prevent the device from failure due to worn out components, it is necessary to replace the <br />components before they reach the end of their lifespan. Use the following replacement intervals <br />as a guideline for the estimate of the total running time. Please contact a BTC Power <br />representative for further assistance when you replace the parts. <br />• Charging Cables: Approximately three (3) years <br />• Intake and exhaust filters: Approximately two (2) years <br />• Coolant: Every five (5) years <br /> <br />NOTE <br />Please keep in mind that the replacement interval of each part can vary depending on, for <br />example, the usage environment of the device. <br /> <br /> <br />