Laserfiche WebLink
www.hilti.com <br />Hilti PROFIS Engineering 3.1.11 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2025 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />9 <br />Company: <br />Address: <br />Phone I Fax: <br />Design: <br />Fastening point: <br /> | <br />McGuff Enclosure Post Anchorage <br />Page: <br />Specifier: <br />E-Mail: <br />Date: <br />9 <br />3/12/2025 <br />Coordinates Anchor [in.] <br />Anchor x y c-x c+x c-y c+y <br />1 -4.500 -2.500 ---11.000 <br />2 4.500 -2.500 ---11.000 <br />3 -4.500 2.500 ---6.000 <br />4 4.500 2.500 ---6.000 <br />7 Installation data <br /> Anchor type and diameter: Hex Head ASTM F 1554 GR. <br /> 36 5/8 <br /> Profile: Square HSS (AISC), HSS4X4X.25; (L x W x T) = 4.000 in. x 4.000 in. x <br /> 0.250 in. <br /> Item number: not available <br /> Hole diameter in the fixture: df = 0.687 in. Maximum installation torque: - <br /> Plate thickness (input): 0.500 in. Hole diameter in the base material: - in. <br /> Recommended plate thickness: not calculated Hole depth in the base material: 8.000 in. <br /> Minimum thickness of the base material: 8.922 in. <br />Æ 5/8 in Hex Head ASTM F 1554 GR. 36 with 8 in nominal embedment depth per Technical data , cast in place installation per MPII