Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />QUALITY REQUIREMENTS 01 4000 - 2 <br />ed. 2023-09-22 <br />4. Specific test and inspection requirements are not specified in this Section. <br />C. Related Requirements: <br />1. Section 01 2100 "Allowances" for testing and inspection allowances. <br />1.3 DELEGATED-DESIGN SERVICES <br />A. Performance and Design Criteria: Where professional design services or certifications by a <br />design professional are specifically required of Contractor by the Contract Documents, provide <br />products and systems complying with specific performance and design criteria indicated. <br />1. If criteria indicated are not sufficient to perform services or certification required, submit <br />a written request for additional information to Architect. <br />1.4 CONFLICTING REQUIREMENTS <br />A. Conflicting Standards and Other Requirements: If compliance with two or more standards or <br />requirements are specified and the standards or requirements establish different or conflicting <br />requirements for minimum quantities or quality levels, comply with the most stringent <br />requirement. Refer conflicting requirements that are different, but apparently equal, to Architect <br />for direction before proceeding. <br />B. Minimum Quantity or Quality Levels: The quantity or quality level shown or specified shall be <br />the minimum provided or performed. The actual installation may comply exactly with the <br />minimum quantity or quality specified, or it may exceed the minimum within reasonable limits. <br />To comply with these requirements, indicated numeric values are minimum or maximum, as <br />appropriate, for the context of requirements. Refer uncertainties to Architect for a decision <br />before proceeding.