Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />OPERATION AND MAINTENANCE DATA 01 7823 - 5 <br />ed. 2023-09-22 <br />1.8 SYSTEMS AND EQUIPMENT OPERATION MANUALS <br />A.Systems and Equipment Operation Manual: Assemble a complete set of data indicating operation of each <br />system, subsystem, and piece of equipment not part of a system. Include information required for daily <br />operation and management, operating standards, and routine and special operating procedures. <br />1.Engage a factory-authorized service representative to assemble and prepare information for each <br />system, subsystem, and piece of equipment not part of a system. <br />2.Prepare a separate manual for each system and subsystem, in the form of an instructional manual <br />for use by Owner's operating personnel. <br />B.Content: In addition to requirements in this Section, include operation data required in individual <br />Specification Sections and the following information: <br />1.System, subsystem, and equipment descriptions. Use designations for systems and equipment <br />indicated on Contract Documents. <br />2.Performance and design criteria if Contractor has delegated design responsibility. <br />3.Operating standards. <br />4.Operating procedures. <br />5.Operating logs. <br />6.Wiring diagrams. <br />7.Control diagrams. <br />8.Piped system diagrams. <br />9.Precautions against improper use. <br />10.License requirements including inspection and renewal dates. <br />C.Descriptions: Include the following: <br />1.Product name and model number. Use designations for products indicated on Contract Documents. <br />2.Manufacturer's name. <br />3.Equipment identification with serial number of each component. <br />4.Equipment function. <br />5.Operating characteristics. <br />6.Limiting conditions. <br />7.Performance curves. <br />8.Engineering data and tests. <br />9.Complete nomenclature and number of replacement parts. <br />D.Operating Procedures: Include the following, as applicable: <br />1.Startup procedures. <br />2.Equipment or system break-in procedures. <br />3.Routine and normal operating instructions. <br />4.Regulation and control procedures. <br />5.Instructions on stopping. <br />6.Normal shutdown instructions. <br />7.Seasonal and weekend operating instructions.