Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />COLD-FORMED METAL FRAMING 05 4000 - 13 <br />B.Fasten both flanges of studs to top and bottom track unless otherwise indicated. Space studs as follows: <br />1.Stud Spacing: As indicated on Drawings. <br />C.Set studs plumb, except as needed for diagonal bracing or required for nonplumb walls or warped surfaces <br />and similar requirements. <br />D.Isolate non-load-bearing steel framing from building structure to prevent transfer of vertical loads while <br />providing lateral support. <br />1.Install single deep-leg deflection tracks and anchor to building structure. <br />2.Install double deep-leg deflection tracks and anchor outer track to building structure. <br />3.Connect vertical deflection clips to bypassing or infill studs and anchor to building structure. <br />4.Connect drift clips to cold-formed steel framing and anchor to building structure. <br />E.Install horizontal bridging in wall studs, spaced vertically in rows indicated on Shop Drawings but not more <br />than 48 inches apart. Fasten at each stud intersection. <br />1.Channel Bridging: Cold-rolled steel channel, welded or mechanically fastened to webs of punched <br />studs. <br />2.Strap Bridging: Combination of flat, taut, steel sheet straps of width and thickness indicated and <br />stud-track solid blocking of width and thickness to match studs. Fasten flat straps to stud flanges and <br />secure solid blocking to stud webs or flanges. <br />3.Bar Bridging: Proprietary bridging bars installed according to manufacturer's written instructions. <br />F.Install miscellaneous framing and connections, including stud kickers, web stiffeners, clip angles, <br />continuous angles, anchors, and fasteners, to provide a complete and stable wall-framing system. <br />3.6 INSTALLATION OF INTERIOR NONLOADBEARING WALL FRAMING <br />A.Install continuous tracks sized to match studs. Align tracks accurately and securely anchor to supporting <br />structure. <br />B.Fasten both flanges of studs to top and bottom track unless otherwise indicated. Space studs as follows: <br />1.Stud Spacing: As indicated on Drawings. <br />C.Set studs plumb, except as needed for diagonal bracing or required for nonplumb walls or warped surfaces <br />and similar requirements. <br />D.Isolate non-load-bearing steel framing from building structure to prevent transfer of vertical loads while <br />providing lateral support.