Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />DOOR HARDWARE 08 7100-14 <br />ed. 2023-10-12 <br />2.11 DOOR STOPS AND HOLDERS <br />A. Manufacturers: <br />1. Scheduled Manufacturer: <br />a. Ives <br />B. Provide door stops at each door leaf: <br />1. Provide wall stops wherever possible. Provide concave type where lockset has a push <br />button of thumbturn. <br />2. Where a wall stop cannot be used, provide universal floor stops. <br />3. Where wall or floor stop cannot be used, provide overhead stop. <br />4. Provide roller bumper where doors open into each other and overhead stop cannot be <br />used. <br />2.12 FINISHES <br />A. FINISH: BHMA 626/652 (US26D); EXCEPT: <br />1. Hinges at Exterior Doors: BHMA 630 (US32D) <br />2. Aluminum Geared Continuous Hinges: BHMA 628 (US28) <br />3. Push Plates, Pulls, and Push Bars: BHMA 630 (US32D) <br />4. Protection Plates: BHMA 630 (US32D) <br />5. Overhead Stops and Holders: BHMA 630 (US32D) <br />6. Door Closers: Powder Coat to Match <br />7. Wall Stops: BHMA 630 (US32D) <br />8. Latch Protectors: BHMA 630 (US32D) <br />9. Weatherstripping: Clear Anodized Aluminum <br />10. Thresholds: Mill Finish Aluminum <br />PART 3 - EXECUTION <br />3.01 EXAMINATION <br />A. Prior to installation of hardware, examine doors and frames, with Installer present, for <br />compliance with requirements for installation tolerances, labeled fire-rated door assembly <br />construction, wall and floor construction, and other conditions affecting performance. Verify <br />doors, frames, and walls have been properly reinforced for hardware installation. <br />B. Submit a list of deficiencies in writing and proceed with installation only after unsatisfactory <br />conditions have been corrected. <br />3.02 INSTALLATION