Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />GLAZING 08 8000 - 3 <br />ed. 2024-02-20 <br />1.8 FIELD CONDITIONS <br />A.Environmental Limitations: Do not proceed with glazing when ambient and substrate temperature <br />conditions are outside limits permitted by glazing material manufacturers and when glazing channel <br />substrates are wet from rain, frost, condensation, or other causes. <br />1.Do not install glazing sealants when ambient and substrate temperature conditions are outside <br />limits permitted by sealant manufacturer or are below 40 deg F. <br />1.9 WARRANTY <br />A.Manufacturer's Special Warranty for Coated-Glass Products: Manufacturer agrees to replace coated- <br />glass units that deteriorate within specified warranty period. Deterioration of coated glass is defined as <br />defects developed from normal use that are not attributed to glass breakage or to maintaining and <br />cleaning coated glass contrary to manufacturer's written instructions. Defects include peeling, <br />cracking, and other indications of deterioration in coating. <br />1.Warranty Period: 10 years from date of Substantial Completion. <br />B.Manufacturer's Special Warranty for Insulating Glass: Manufacturer agrees to replace insulating-glass <br />units that deteriorate within specified warranty period. Deterioration of insulating glass is defined as <br />failure of hermetic seal under normal use that is not attributed to glass breakage or to maintaining and <br />cleaning insulating glass contrary to manufacturer's written instructions. Evidence of failure is <br />obstruction of vision by dust, moisture, or film on interior surfaces of glass. <br />1.Warranty Period: 10 years from date of Substantial Completion. <br />C.Manufacturer's Special Warranty for Heat-Soaked Tempered Glass: Manufacturer agrees to replace <br />heat-soaked tempered glass units that spontaneously break due to nickel sulfide (NiS) inclusions at a <br />rate exceeding 0.3 percent (3/1000) within specified warranty period. Coverage for any other cause is <br />excluded. <br />1.Warranty Period: 10 years from date of Substantial Completion. <br />PART 2 - PRODUCTS <br />2.1 MANUFACTURERS <br />A.Source Limitations for Glass: Obtain tinted and coated glass from single source from single <br />manufacturer. <br />B.Source Limitations for Glazing Accessories: For each product and installation method, obtain from <br />single source from single manufacturer.