Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />RESILIENT BASE AND ACCESSORIES 09 6513 - 4 <br />H.Colors and Patterns: 193 Black Brown. <br />2.3 RUBBER MOLDING ACCESSORY <br />A.Manufacturers: Subject to compliance with requirements, provide products by one of the following: <br />1.Armstrong World Industries, Inc. <br />2.Burke Mercer Flooring Products; a division of Burke Industries Inc. <br />3.Johnsonite; a Tarkett company. <br />4.Mohawk Group. <br />5.Roppe Corporation, USA. <br />B.Description: Rubber carpet edge for glue-down applications, nosing for carpet, nosing for resilient <br />floor covering, reducer strip for resilient floor covering, and transition strips. <br />C.Profile and Dimensions: As selected by Architect from manufacturer’s full range of profiles and <br />sizes. <br />D.Locations: Provide rubber molding accessories at carpet and resilient floor covering edges and where <br />reducer strip and transition strips are required. <br />E.Colors and Patterns: As indicated by manufacturer's designations. <br />2.4 INSTALLATION MATERIALS <br />A.Trowelable Leveling and Patching Compounds: Latex-modified, portland cement based or blended <br />hydraulic-cement-based formulation provided or approved by resilient-product manufacturer for <br />applications indicated. <br />B.Adhesives: Water-resistant type recommended by resilient-product manufacturer for resilient products <br />and substrate conditions indicated. <br />C.Stair-Tread Nose Filler: Two-part epoxy compound recommended by resilient stair-tread <br />manufacturer to fill nosing substrates that do not conform to tread contours. <br />PART 3 - EXECUTION <br />3.1 EXAMINATION <br />A.Examine substrates, with Installer present, for compliance with requirements for maximum moisture <br />content and other conditions affecting performance of the Work. <br />1.Verify that finishes of substrates comply with tolerances and other requirements specified in <br />other Sections and that substrates are free of cracks, ridges, depressions, scale, and foreign <br />deposits that might interfere with adhesion of resilient products.