Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />INTERIOR PAINTING 09 9123 - 5 <br />B.Products: Subject to compliance with requirements, available products that may be incorporated <br />into the Work include, but are not limited to products listed in the Interior Painting Schedule for <br />the paint category indicated. <br />2.2 PAINT, GENERAL <br />A.MPI Standards: Products shall comply with MPI standards indicated and shall be listed in its "MPI <br />Approved Products Lists." <br />B.Material Compatibility: <br />1.Materials for use within each paint system shall be compatible with one another and <br />substrates indicated, under conditions of service and application as demonstrated by <br />manufacturer, based on testing and field experience. <br />2.For each coat in a paint system, products shall be recommended in writing by topcoat <br />manufacturers for use in paint system and on substrate indicated. <br />C.VOC Content: Products shall comply with VOC limits of authorities having jurisdiction and, for <br />interior paints and coatings applied at Project site, the following VOC limits, exclusive of colorants <br />added to a tint base, when calculated according to 40 CFR 59, Subpart D (EPA Method 24). These <br />requirements do not apply to paints and coatings that are applied in a fabrication or finishing shop: <br />1.Flat Paints and Coatings: 50 g/L. <br />2.Nonflat Paints and Coatings: 150 g/L. <br />3.Dry-Fog Coatings: 400 g/L. <br />4.Primers, Sealers, and Undercoaters: 200 g/L. <br />5.Anticorrosive and Antirust Paints Applied to Ferrous Metals: 250 g/L. <br />6.Zinc-Rich Industrial Maintenance Primers: 340 g/L. <br />7.Pretreatment Wash Primers: 420 g/L. <br />8.Floor Coatings: 100 g/L. <br />9.Shellacs, Clear: 730 g/L. <br />10.Shellacs, Pigmented: 550 g/L. <br />D.Colors: As indicated on finish key schedule. <br />E.Chemical Components of Field-Applied Interior Paints and Coatings: Provide topcoat paints and <br />anti-corrosive and anti-rust paints applied to ferrous metals that comply with the following <br />chemical restrictions; these requirements do not apply to paints and coatings that are applied in a <br />fabrication or finishing shop: <br />1.Aromatic Compounds: Paints and coatings shall not contain more than 1.0 percent by <br />weight of total aromatic compounds (hydrocarbon compounds containing one or more <br />benzene rings). <br />2.Restricted Components: Paints and coatings shall not contain any of the following: <br />a.Acrolein. <br />b.Acrylonitrile.