Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />WALL AND DOOR PROTECTION 10 2600 - 1 <br />Note that the Round 1 Project Specifications is non-site specific and not all portions of the <br />individual Sections contained in the Project Specifications may apply to a particular Project. Refer <br />to the Drawings. <br />SECTION 10 2600 - WALL AND DOOR PROTECTION <br />PART 1 - GENERAL <br />1.1 RELATED DOCUMENTS <br />A. Drawings and general provisions of the Contract, including General and Supplementary <br />Conditions and Division 01 Specification Sections, apply to this Section. <br />1.2 SUMMARY <br />A. Section Includes: <br />1. Corner guards. <br />2. End-wall guards. <br />B. Related Requirements: <br />1. Section 05 5000 "Metal Fabrications" for pipe guards. <br />2. Section 08 7100 "Door Hardware" for metal protective trim units, according to <br />BHMA A156.6, used for armor, kick, mop, and push plates. <br />1.3 ACTION SUBMITTALS <br />A. Product Data: For each type of product. <br />1. Include construction details, material descriptions, impact strength, dimensions of <br />individual components and profiles, and finishes. <br />B. Shop Drawings: For each type of wall and door protection showing locations and extent. <br />1.4 INFORMATIONAL SUBMITTALS <br />A. Sample Warranty: For special warranty. <br />1.5 CLOSEOUT SUBMITTALS <br />A. Maintenance Data: For each type of wall and door protection product to include in maintenance <br />manuals.