Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />FIRE PROTECTION CABINETS 10 4413 - 4 <br />B.Protect mechanical finishes on exposed surfaces of fire protection cabinets from damage by applying a <br />strippable, temporary protective covering before shipping. <br />C.Finish fire protection cabinets after assembly. <br />D.Appearance of Finished Work: Noticeable variations in same piece are not acceptable. Variations in <br />appearance of adjoining components are acceptable if they are within the range of approved Samples and are <br />assembled or installed to minimize contrast. <br />2.5 STEEL FINISHES <br />A.Surface Preparation: Remove mill scale and rust, if present, from uncoated steel, complying with SSPC- <br />SP 5/NACE No. 1, "White Metal Blast Cleaning" or SSPC-SP 8, "Pickling". After cleaning, apply a conversion <br />coating suited to the organic coating to be applied over it. <br />B.Baked-Enamel or Powder-Coat Finish: Immediately after cleaning and pretreating, apply manufacturer's <br />standard two-coat, baked-on finish consisting of prime coat and thermosetting topcoat. Comply with coating <br />manufacturer's written instructions for applying and baking to achieve a minimum dry film thickness of 2 mils. <br />1.Color and Gloss: As selected by Owner from manufacturer's full range. <br />PART 3 - EXECUTION <br />3.1 EXAMINATION <br />A.Examine walls and partitions for suitable framing depth and blocking where semirecessed cabinets will be <br />installed. <br />B.Proceed with installation only after unsatisfactory conditions have been corrected. <br />3.2 PREPARATION <br />A.Prepare recesses for semi-recessed fire protection cabinets as required by type and size of cabinet and trim <br />style. <br />3.3 INSTALLATION <br />A.General: Install fire protection cabinets in locations and at mounting heights acceptable to authorities having <br />jurisdiction. <br />B.Fire Protection Cabinets: Fasten cabinets to structure, square and plumb. <br />1.Unless otherwise indicated, provide recessed fire protection cabinets. If wall thickness is not adequate <br />for recessed cabinets, provide semirecessed fire protection cabinets.