My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
2800 N Main St Unit# 1100 - Plan
PBA
>
Building
>
ProjectDox
>
M
>
Main St
>
2800 N Main St Unit# 1100 Bldg# 2810
>
2800 N Main St Unit# 1100 - Plan
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
2/13/2026 5:03:22 AM
Creation date
2/13/2026 5:00:40 AM
Metadata
Fields
Template:
Plan
Permit Number
20185547
40140186
101124821
Full Address
2800 N Main St Unit# 1100 Bldg# 2810
Street Number
2800
Street Direction
N
Street Name
Main
Street Suffix
St
Building Number
2810
Unit Number
1100
Jump to thumbnail
< previous set
next set >
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
647
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />SECTION 23 0513 - COMMON MOTOR REQUIREMENTS FOR HVAC EQUIPMENT <br />PART 1 - GENERAL <br />1.1 RELATED DOCUMENTS <br />A.Drawings and general provisions of the Contract, including General and Supplementary <br />Conditions and Division 01 Specification Sections, apply to this Section. <br />1.2 SUMMARY <br />A.Section includes general requirements for single-phase and polyphase, general-purpose, <br />horizontal, small and medium, squirrel-cage induction motors for use on ac power systems up to <br />600 V and installed at equipment manufacturer's factory or shipped separately by equipment <br />manufacturer for field installation. <br />1.3 COORDINATION <br />A.Coordinate features of motors, installed units, and accessory devices to be compatible with the <br />following: <br />1.Motor controllers. <br />2.Torque, speed, and horsepower requirements of the load. <br />3.Ratings and characteristics of supply circuit and required control sequence. <br />4.Ambient and environmental conditions of installation location. <br />PART 2 - PRODUCTS <br />2.1 GENERAL MOTOR REQUIREMENTS <br />A.Comply with requirements in this Section except when stricter requirements are specified in <br />HVAC equipment schedules or Sections. <br />B.Comply with NEMA MG 1 unless otherwise indicated. <br />C.Comply with IEEE 841 for severe-duty motors. <br />2.2 MOTOR CHARACTERISTICS <br />A.Duty: Continuous duty at ambient temperature of 40 deg C and at altitude of 3300 feet above <br />sea level. <br />B.Capacity and Torque Characteristics: Sufficient to start, accelerate, and operate connected loads <br />at designated speeds, at installed altitude and environment, with indicated operating sequence, <br />and without exceeding nameplate ratings or considering service factor. <br />2.3 POLYPHASE MOTORS <br />A.Description: NEMA MG 1, Design B, medium induction motor.
The URL can be used to link to this page
Your browser does not support the video tag.