Laserfiche WebLink
www.hilti.com <br />Hilti PROFIS Engineering 3.1.14 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2025 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />6 <br />Company: <br />Address: <br />Phone I Fax: <br />Design: <br />Fastening point: <br />E2 Consulting Engineers <br /> | <br />Distribution Switchboard <br />Page: <br />Specifier: <br />E-Mail: <br />Date: <br />6 <br />Michael Phillips, PE <br />5/19/2025 <br />Coordinates Anchor [in.] <br />Anchor x y c-x c+x c-y c+y <br />1 -59.000 -9.000 14.000 132.000 19.500 37.500 <br />2 59.000 -9.000 132.000 14.000 19.500 37.500 <br />3 -59.000 9.000 14.000 132.000 37.500 19.500 <br />Anchor x y c-x c+x c-y c+y <br />4 59.000 9.000 132.000 14.000 37.500 19.500 <br />5 23.000 9.000 96.000 50.000 37.500 19.500 <br />6 23.000 -9.000 96.000 50.000 19.500 37.500 <br />7 Installation data <br /> Anchor type and diameter: Kwik Bolt TZ2 - SS 304 3/8 (2 <br /> 1/2) hnom3 <br /> Profile: no profile Item number: 2210245 KB-TZ2 3/8x5 SS304 <br /> Hole diameter in the fixture: df = 0.438 in. Maximum installation torque: 30.093 ft.lb <br /> Plate thickness (input): 0.250 in. Hole diameter in the base material: 0.375 in. <br /> Recommended plate thickness: not calculated Hole depth in the base material: 3.250 in. <br /> Drilling method: Hammer drilled Minimum thickness of the base material: 5.000 in. <br /> Cleaning: Manual cleaning of the drilled hole according to instructions for use is <br /> required. <br /> Hilti Æ 3/8 in Kwik Bolt TZ2 - SS 304 with 3 in nominal embedment depth per ICC-ES ESR-4266 , Hammer drill bit installation per MPII <br />7.1 Recommended accessories <br />Drilling Cleaning Setting <br />• Suitable Rotary Hammer <br />• Properly sized drill bit <br />• Manual blow-out pump • Torque controlled cordless impact tool <br />• Torque wrench <br />• Hammer