Laserfiche WebLink
CITY OF SANTA ANA <br />Planning and Building Agency <br />Approved <br />FOR PERMIT ISSUANCE <br />Results: Master ID: <br />Ice Thickness: 0 in. <br />Date: <br />Concurrent Temperature: 25 F <br />Gust Speed 30 mph <br />Data Source: Standard ASCE/SEI 7-16, Figs. 10-2 through 10-8 <br />Date Accessed: Tue Sep 19 2023 <br />Ice thicknesses on structures in exposed locations at elevations higher than the surrounding terrain and in valleys <br />and gorges may exceed the mapped values. <br />Values provided are equivalent radial ice thicknesses due to freezing rain with concurrent 3-second gust speeds, <br />for a 500-year mean recurrence interval, and temperatures concurrent with ice thicknesses due to freezing rain. <br />Thicknesses for ice accretions caused by other sources shall be obtained from local meteorological studies. Ice <br />thicknesses in exposed locations at elevations higher than the surrounding terrain and in valleys and gorges may <br />exceed the mapped values. <br />Snow <br />Results: <br />Ground Snow Load, pg <br />Mapped Elevation: <br />Data Source: <br />Date Accessed: <br />2 <br />0 Ib/ft <br />151.1 ft <br />ASCE/SEI 7-16, Table 7.2-8 <br />Tue Sep 19 2023 <br />Values provided are ground snow loads. In areas designated "case study <br />required," extreme local variations in ground snow loads preclude mapping at <br />this scale. Site -specific case studies are required to establish ground snow <br />loads at elevations not covered. <br />Snow load values are mapped to a 0.5 mile resolution. This resolution can <br />create a mismatch between the mapped elevation and the site -specific <br />elevation in topographically complex areas. Engineers should consult the local <br />authority having jurisdiction in locations where the reported 'elevation' and <br />'mapped elevation' differ significantly from each other. <br />littps://asce7hazardtool.online/ Page 3 of 6 Tue Sep 19 2023 <br />