|
=1TY OF SANTA ANA
<br />nning and BUilding Agen y
<br />CMfnOu/C�
<br />Lifting weight 66.3 kg (146.1 lb)
<br />Total installed weight 78.9 kg (174 lb)
<br />Enclosure Outdoor-NEMA 3R
<br />I08D-BAT Microinverter enclosure NEMA type 6
<br />Cooling Natural convection
<br />Operating noise @1 m <30 dBA maximum
<br />Altitude Up to 2,500 meters (8,202 feet)
<br />Mounting Wall -mount or pedestal -mount (sold separately)
<br />Compatible with IQ and M Series Microinverters, IQ System Controller 3/3G,
<br />Compatibility
<br />IQ Combiner 5/5C, and IQ Gateway for grid -tied and backup operation
<br />Communication
<br />Wired control communication
<br />Services
<br />Backup, Self -Consumption, TOU, and NEM integrity
<br />Monitoring
<br />Enphase Installer Platform and Enphase App monitoring options; API integration
<br />CA Rule 21(UL 1741-SA), IEEE 1547:2018 (UL 1741-SB, 3rd Ed.) CAN/CSA C22.2 No.
<br />107.1-16
<br />UL 95408, UL 9540A9, UN 38.3, UL 1998, UL 991, NEMA Type 3R, AC156 EMI: 47 CFR,
<br />Compliance
<br />Part 15, Class B, ICES 003
<br />Cell module: UL 1973, UN 38.3
<br />Inverters: UL 62109-1, IEC 62109-2
<br />What's in the box
<br />IQ Battery 5P unit
<br />IQ Battery 5P unit (605-T02-US00-1-3)
<br />ID cover and conduit cover
<br />IQ Battery 5P cover with two conduit covers for the left and right sides of the unit
<br />Bottom mounting bracket for mounting the battery on the wall. One top shield is
<br />Bottom mounting bracket and top shield
<br />required for UL 9540A
<br />M5 seismic screws
<br />Two M5 seismic screws for securing the battery unit on the bottom mounting bracket
<br />M4 grounding screws
<br />Two M4 grounding screws for securing the top shield on the bottom mounting bracket
<br />M5 ID cover grounding screws
<br />Two M5 ID cover grounding screws for the EMI/EMC requirement
<br />Cable ties
<br />Six cable ties for securing field cables to the unit
<br />Control (CTRL) connector
<br />Spare CTRL connector without resistor for CTRL wiring
<br />Control (CTRL) connector with resistor
<br />Spare CTRL connector with resistor for CTRL wiring
<br />Quick install guide (QIG)
<br />QIG for IQ Battery unit installation instructions
<br />IQ8D-BAT-RMA IQ8D-BAT Microinverter for field replacement
<br />B05402-US00-1-3-RMA IQ Battery 5P Battery unit for field replacement
<br />B05-CX-0550-0 IQ Battery 5P cover for field replacement
<br />B05-PI-0550-0 IQ Battery 5P pedestal mount
<br />a Following local standards, choose a well -ventilated. non -habitable indoor location (like a 2-car garage) or an outdoor location where the ambient temperature and humidity are within -4'F to 131°F
<br />(-20°C to 55°C) and 5%to 95% RH, non -condensing. Avoid direct sunlight to ensure the temperature stays in the optimal operating range. This ensures charging and discharging currents are not
<br />de -rated due to temperature. The full performance will occur within 59'F to 113°F (15°C to 45'C) while charging and within 41°F to 122°F (5°C to 50'C) while discharging.
<br />° Evaluated to UL 9540A for thermal runaway fire propagation and reduced separation distance as required in 2021 IRC R328.3.1, 2021 IFC 1207.1.5, and 2023 NFPA 85515.3.1 and 9.1.5. Follow all
<br />Installation instructions and local codes and requirements of the Authority Having Jurisdiction (AHJ) when installing the Enphase Energy System.
<br />DSH-00m0-10.0-EN-2025-03-24
<br />EMP QW96TRI4OLAR
<br />Mechanical data
<br />FOR
<br />PEA N C
<br />Lifting weight
<br />66.3 kg (146.1 lb)
<br />TEL:: (800) 06 6953
<br />Total installed weight
<br />78.9 kg (174 lb)
<br />Ma
<br />CSLB:1057693
<br />Email: permits@mpwrsolar.com
<br />ter ID:
<br />Enclosure
<br />Outdoor-NEMA 3R
<br />Da
<br />e:
<br />IQ8D-BAT Microinverter enclosure
<br />NEMA type 6
<br />C-10 #1057693
<br />Cooling Natural convection
<br />Operating noise @1 m
<br /><30 dBA maximum
<br />Scott Forster
<br />Altitude
<br />Up to 2,500 meters (8,202 feet)
<br />VERSION
<br />Mounting
<br />Wall -mount or pedestal -mount (sold separately)
<br />DESCRIPTION DATE REV
<br />INITIAL RELEASE 05/22/2025 UR
<br />Compatibility Compatible with IQ and M Series Microinverters, IQ System Controller 3/3G,
<br />IQ Combiner 5/5C, and IQ Gateway for grid -tied and backup operation
<br />Communication Wired control communication
<br />Services Backup, Self -Consumption, TOU, and NEM integrity
<br />Monitoring Enphase Installer Platform and Enphase App monitoring options; API integration
<br />CA Rule 21(UL 1741-SA), IEEE 1547:2018 (UL 1741-513, 3rd Ed.) CAN/CSA C22.2 No.
<br />107.1-16
<br />Compliance UL 95401, UL 9540A9, UN 38.3, UL 1998, UL 991, NEMA Type 3R, AC156 EMI: 47 CFR,
<br />Part 15, Class B, ICES 003
<br />Cell module: UL 1973, UN 38.3
<br />Inverters: UL 62109-1, IEC 62109-2 PROJECT NAME
<br />Z
<br />What's in the box
<br />O
<br />IQ Battery 5P unit
<br />IQ Battery 5P unit (1305402-US00-1-3)
<br />V)
<br />0
<br />ID cover and conduit cover
<br />IQ Battery 5P cover with two conduit covers for the left and right sides of the unit
<br />UU Q
<br />Bottom mounting bracket and top shield
<br />Bottom mounting bracket for mounting the battery on the wall. One top shield is
<br />Z> = Z
<br />Z
<br />required for UL 9540A
<br />= o O CD
<br />H J N
<br />M5 seismic screws
<br />Two M5 seismic screws for securing the battery unit on the bottom mounting bracket
<br />ti LL i
<br />LU > N
<br />Q Q LLJ
<br />U
<br />M4 grounding screws
<br />Two M4 grounding screws for securing the top shield on the bottom mounting bracket
<br />1J
<br />2 Z fn o
<br />—
<br />M5 ID cover grounding screws
<br />Two M5 ID cover grounding screws for the EMI/EMC requirement
<br />I j Z W Z
<br />Cable ties
<br />Six cable ties for securing field cables to the unit
<br />W CN < ? 0-
<br />Control (CTRL) connector
<br />Spare CTRL connector without resistor for CTRL wiring
<br />Y Z O
<br />Q fn
<br />Control (CTRL) connector with resistor
<br />Spare CTRL connector with resistor for CTRL wiring
<br />}
<br />H
<br />Quick install guide (QIG)
<br />QIG for IQ Battery unit installation instructions
<br />J
<br />H
<br />IQ8D-BAT-RMA IQ8D-BAT Microinverter for field replacement
<br />B05-T02-US00-1-3-RMA IQ Battery 5P Battery unit for field replacement
<br />SHEET NAME
<br />B05-CX-0550-0 IQ Battery 5P cover for field replacement
<br />B05-PI-0550-0 IQ Battery 5P pedestal mount
<br />SHEET SIZE
<br />a Following local standards, choose a well -ventilated, non -habitable indoor location (like a 2-car garage) or an outdoor location where the ambient temperature and humidity are within-4"F to 131'F ANSI B
<br />(-20°C to 55°C) and 5%to 95% RH, non -condensing. Avoid direct sunlight to ensure the temperature stays in the optimal operating range. This ensures charging and discharging currents are not
<br />de -rated due to temperature. The full performance will occur within 59'F to 113°F(15'C to 45°C) while charging and within 41'F to 1220F(50C to 50'C) while discharging. ' Evaluated to UL 9540A for thermal runaway fire propagation and reduced separation distance as required in 2021 IRC R328.3.1, 2021 IFC 1207.1.5. and 2023 NFPA 85515.3.1 and 9.1.5. Follow all 11"
<br />X 17"
<br />installation instructlons and local codes and requirements of the Authority Having Jurisdiction (AHJ) when installing the Enphase Energy System.
<br />DSH-00010-10.0-EN-2025-03-24 I SHEET NUMBER
<br />PV-11
<br />
|