Laserfiche WebLink
Thor Series US 12 B3 Installation Instructions <br />Tools Needed <br />Wire Strippers <br />Preferred connection type (Wire nuts, Tap splice, Butt splice etc. ) <br />Zip ties and tie downs. (Optional used for a cleaner install). <br />4.- -*· tt-M»,-Iy'/h.*P <br />US 12 B3 <br />• It only takes a few minutes to install our LEDs into the channel letters. <br />• The following are steps to complete the installation. <br />• We recommend testing one letter first then proceeding to complete the project. <br />• Each module consumes - 0.6 watts/module, 1.8 watts/foot <br />Stepl <br />Using a predetermined layout, Install length of prewired LEDs to channel. <br />Using either adhesive or mounting screw. (Pop rivet) for mounting. <br />Should a separate run of modules be needed within a letter use a tap splice to <br />extend the power. <br />464-*664.721/.4.:4'..·r:r·$4 <br />' 1 Step 2 <br />-I &,-. ut 't'ZI GiZN CKS-80·12.....2tgf f' 46,• Go over all connections making certain loose wires are capped and the strand of <br />-- .9 lighting is not looped (creating a closed circuit). <br />• Modules may be connected in series or parallel. <br />• Standard 12 volt power supply (CLG-60-12v MeanWell) pictured. <br />• Load rating maximum - 100 modules/33 feet. <br />'f • Recommended 90modules / 30 feet (90% load)."4*.*Ai+44.6..4>*·,€C,•;;44,#4. <br />Step 3 <br />:i <br />€ • The power should be connected to the first LED in the strand and daisy <br />1 chained throughout the rest of the project. <br />,·1 . Based on power consumption you can split the load to ensure an even <br />power distribution. <br />¢t.• All of our modules are integrated with Constant Current circuitries which <br />k keep the LEDs at the same brightness from over/under voltage caused by power <br />surge /voltage drop along the line. <br />-fv:A€e,er,0v,ati»K·,e·,+A.*te· <br />AVA Technology Inc 2640 S. Myrtle Ave, Monroviaca 91016 626-574-7726 <br />--,11-