Laserfiche WebLink
www.hilti.com <br />Hilti PROFIS Engineering 3.1.4 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2024 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />8 <br />Company: <br />Address: <br />Phone I Fax: <br />Design: <br />Fastening point: <br /> | <br />PLATE ON COLUMN <br />Page: <br />Specifier: <br />E-Mail: <br />Date: <br />8 <br />10/15/2024 <br />Coordinates Anchor [in.] <br />Anchor x y c-x c+x c-y c+y <br />1 -4.875 -4.875 ---- <br />2 4.875 -4.875 ---- <br />3 -4.875 4.875 ---- <br />4 4.875 4.875 ---- <br />7 Installation data <br /> Anchor type and diameter: HDI-TZ 5/8 <br /> Profile: Steel pipe, PIPE4STD; (L x W x T) = 4.500 in. x 4.500 in. x 0.237 in. Item number: 2351769 HDI-TZ 5/8" <br /> Hole diameter in the fixture: df = 0.687 in. Maximum installation torque: 250 in.lb <br /> Plate thickness (input): 0.250 in. Hole diameter in the base material: 0.844 in. <br /> Recommended plate thickness: not calculated Hole depth in the base material: 3.000 in. <br /> Drilling method: Hammer drilled Minimum thickness of the base material: 6.000 in. <br /> Cleaning: Manual cleaning of the drilled hole according to instructions for use is <br /> required. <br /> Hilti HDI-TZ flush anchor with 3.25 in embedment, 5/8, Carbon steel, installation per ESR-4236 <br />7.1 Recommended accessories <br />Drilling Cleaning Setting <br />• Suitable Rotary Hammer <br />• Properly sized drill bit <br />• Manual blow-out pump • Drop-in anchor hand-setting or <br /> machine-setting tool <br />• Torque wrench <br />• Hammer <br />T-MOBILE <br />LA02034A <br />27 of 28