My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
HOLD-1232 S Sycamore Unit #2 - Plan
PBA
>
Building
>
ProjectDox
>
S
>
Sycamore St
>
1232 S Sycamore St Unit# 2
>
HOLD-1232 S Sycamore Unit #2 - Plan
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
2/24/2026 5:00:42 AM
Creation date
2/24/2026 5:00:13 AM
Metadata
Fields
Template:
Plan
Permit Number
102123400
Full Address
1232 S Sycamore St Unit# 2
Street Number
1232
Street Direction
S
Street Name
Sycamore
Street Suffix
St
Unit Number
2
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
34
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
CITY OF SANTA ANA <br />Planning and Building Agency � <br />6 <br />CKS <br />9::111 <br />PRESCRIPTIVE RESIDENTIAL ADDITIONS THAT DO NOT REQUIRE HERS FIELD <br />MA <br />CALIFORNIA ENERGY COMMISSION VERIFICATION <br />,WNW <br />4 <br />CEC- CF113-ADD-02-E <br />CERTIFICATE OF COMPLIANCE <br />This compliance document is only applicable to additions less than or equal to 1,000 square feet (ft2)and do <br />not require HERS field verification for compliance. When HERS verification is required, a CF1R-ADD-01 shall <br />first be registered with a HERS Provider Data Registry. <br />Alterations to Space Conditioning Systems that are exempt from HERS verification requirements may use the <br />CF1R-ADD-02 and CF2R-ADD-02 compliance documents. Possible exemptions from duct leakage testing <br />include: less than 25 feet (ft) of ducts were added or replaced, or the existing duct system was insulated with <br />asbestos; or the existing duct system was previously tested and passed by a HERS Rater. If space conditioning <br />systems are altered and are not exempt from HERS verification, then a CF1R-ADD-01 and CF1R-ALT-02 must be <br />completed and registered with a HERS Provider Data Registry. <br />Additions or alterations that utilize closed cell Spray Polyurethane Foam (ccSPF) with a density of 1.5 to less <br />than 2.5 pounds per cubic foot having an R-value greater than 5.8 per inch, or open cell Spray Polyurethane <br />Foam (ocSPF) with a density of 0.4 to less than 1.5 pounds per cubic foot having an R-value of 3.6 per inch, <br />shall complete and register a CF1R ADD-01 with a HERS Provider Data Registry. <br />If more than one person has responsibility for installation of the items on this certificate, each person shall <br />prepare and sign a certificate applicable to the portion of construction for which they are responsible. <br />Alternatively, the person with chief responsibility for construction shall prepare and sign this certificate for the <br />entire construction. All applicable Mandatory Measures shall be met. Temporary labels shall not be removed <br />before verification by the building inspector. <br />Project Details <br />Field Name <br />Data Entry <br />Field Name <br />Data Entry <br />Project Name: <br />ADU <br />Enforcement Agency: <br />Dwelling Address: <br />Permit Number: <br />1232 S SYCAMORE <br />ST <br />City and Zip Code: <br />Date Permit Issued: <br />SANTA ANA <br />CA.92707 <br />CA Building Energy Efficiency Standards - 2022 Residential Compliance <br />January 2022 <br />PRESCRIPTIVE RESIDENTIAL ADDITIONS THAT DO NOT REQUIRE HERS FIELD <br />n`. j� CALIFORNIA ENERGY COMMISSION VERIFICATION <br />rr IRWO' CEC- CF1R- D-02-E <br />C. Onaoue Surface Details — Nonframed Walls (Section 150.1(c)1) <br />Field <br />Field Name <br />Data Entry 1 <br />Data Entry 2 <br />Data E ry 3 <br />01 <br />Tag/ID <br />02 <br />Assembly Type <br />03 <br />Assembly Materials <br />04 <br />Thickness <br />(inches) <br />05 <br />Proposed <br />Core Insulation R-value <br />06 <br />Proposed <br />Continuous Insulation <br />R-value <br />07 <br />Proposed <br />U-Factor <br />08 <br />Proposed <br />Joint Appendix JA4 <br />Reference <br />Table <br />09 <br />Proposed <br />Joint Appendix JA4 <br />Reference <br />Cell <br />10 <br />Required <br />U-Factor from Table <br />150.1-A <br />11 <br />Comments <br />CA Building Energy Efficiency Standards - 2022 Residential Compliance <br />January 2022 <br />PRESCRIPTIVE RESIDENTIAL ADDITIONS THAT DO NOT REQUIRE HERS FIELD <br />nAA <br />CALIFORNIA ENERGY COMMISSION VERIFICATION <br />NOW CEC- MR-ADD-02-E <br />A. GENERAL INFORMATION <br />Field <br />Field Name <br />Data Entry <br />01 <br />Project Name: <br />ADU <br />02 <br />Date Prepared: <br />8-31 —24 <br />03 <br />Project Location: <br />1232 S SYCAMORE ST UNIT "2" <br />04 <br />Building Front <br />EAST <br />Orientation (deg): <br />05 <br />CA City: <br />SANTA ANA CA.92707 <br />06 <br />Number of Dwelling <br />1 <br />Units with Additions: <br />07 <br />Zip Code: <br />92707 <br />08 <br />Fuel Type: <br />Natural Gas <br />09 <br />Climate Zone: <br />8 <br />10 <br />Total Conditioned Floor <br />430 SF <br />Area (ft2) (Addition): <br />11 <br />Building Type: <br />RESIDENTIAL WOOD FRAME <br />12 <br />Slab Area (ft2): <br />N/A <br />13 <br />Project Scope: <br />ADU <br />Exceptions to <br />Fenestration U-factor <br />14 <br />and SHGC <br />150.1(c)3A: <br />CA Building Energy Efficiency Standards - 2022 Residential Compliance <br />January 2022 <br />PRESCRIPTIVE RESIDENTIAL ADDITIONS THAT DO NOT REQUIRE HERS FIELD <br />rMA <br />CALIFORNIA ENERGY COMMISSION VERIFICATION <br />WNW <br />CEC- CF1R-ADD- 2-E <br />D. Onaaue Surface Details — Mass Walls (Section 150.1(c)lBii) <br />Field <br />Field Name <br />Data Entry 1 <br />Data Entry 2 <br />Data Entry <br />01 <br />Tag/ID <br />02 <br />Above Grade/Below <br />Grade <br />03 <br />Mass Type <br />04 <br />Mass Thickness <br />05 <br />Proposed <br />Joint Appendix JA4 <br />Reference <br />Table <br />06 <br />Proposed <br />Joint Appendix JA4 <br />Reference <br />Cell <br />07 <br />Proposed <br />Interior <br />Furring Strip Thickness <br />08 <br />Proposed <br />Interior7 <br />Insulation R-value <br />09 <br />Proposed <br />Exterior <br />Furring Strip Thickness <br />10 <br />Proposed <br />Exterior <br />Insulation R-value <br />11 <br />Proposed <br />Joint Appendix JA4 <br />Reference <br />Table <br />12 <br />Proposed <br />Joint Appendix J 4 <br />Reference <br />Cell <br />13 <br />Propo;sembly <br />Total U-factor <br />14 <br />Re Ired <br />I erior R-value <br />15 <br />equired <br />Exterior R-value <br />16 <br />Required <br />Total Assembly U-factor <br />CA Building Energy Efficiency Standards - 2022 Residential Compliance <br />January 2022 <br />PRESCRIPTIVE RESIDENTIAL ADDITIONS THAT DO NOT REQUIRE HERS FIELD <br />nlm <br />CALIFORNIA ENERGY COMMISSION VERIFICATION <br />INOW <br />B. Opaque Surface Details— Framed (Section 150.2(a) and 150.1(c)1) <br />CEC- MR-ADD-02-E <br />Field <br />Field Name <br />Data Entry 1 <br />Data Entry 2 <br />Data Entry 3 <br />01 <br />Tag/ID <br />RC2024108 <br />RC2024108 <br />02 <br />Assembly Type <br />Wall <br />Ceiling <br />03 <br />Frame Type <br />Wood <br />Wood <br />04 <br />Frame Depth (inches) <br />3.5 <br />5.5 <br />05 <br />Frame Spacing (inches) <br />06a <br />Proposed <br />Cavity R-value <br />R-13 <br />R-30 <br />06b <br />Proposed <br />R-13 <br />R-30 <br />Continuous Insulation <br />R-value <br />R-13 <br />R-30 <br />07 <br />Proposed <br />U-Factor <br />08 <br />Proposed <br />Joint Appendix <br />4.3 <br />4.3 <br />JA4 Reference <br />Table <br />09 <br />Proposed <br />Joint Appendix <br />JA4 Reference <br />Cell <br />10 <br />Required <br />U-Factor from Table <br />150.1-A <br />11 <br />Comments <br />CA Building Energy Efficiency Standards - 2022 Residential Compliance <br />January 2022 <br />PRESCRIPTIVE RESIDENTIAL ADDITIONS THAT DO NOT REQUIRE HERS FIELD <br />yt �} CALIFORNIA ENERGY COMMISSION VERIFICATION <br />�r <br />E. Slab Insulation (Table 150.1-A or Table 150.1-B) <br />Note: Heated slab floors require mandatory slab insulation (see Table 110.8-A). <br />CEC- MR-AD13-02-E <br />Field <br />Field Name <br />Data Entry 1 <br />Data Entry 2 <br />Data Entry 3 <br />01 <br />Floor Type <br />Covered slab <br />02 <br />Proposed <br />Insulation R-value <br />0 <br />03 <br />Proposed <br />Insulation U-factor <br />0 <br />04 <br />Required <br />Insulation R-value <br />0 <br />05 <br />Required <br />Insulation U-factor <br />0 <br />06 <br />Comments E <br />4" concrete slab over 2" <br />of <br />sand and 6 mill vapour barrier or sealed <br />with redguard seal <br />F. Radiant Barrier (Section 150.1(c)2) <br />A radiant barrier is required (for Climate Zones 2-15) <br />• Radiant barriers shall meet specific eligibility and installation criteria to receive credit for <br />compliance with the Building Energy Efficiency Standards for low-rise residential buildings. Refer to <br />Reference Appendices, Residential Appendix, RA4.2.1 <br />• The emittance of the radiant barrier shall be less than or equal to 0.05 as tested in accordance with <br />American Society for Testing and Materials (ASTM) C1371 or ASTM E408. <br />For Prescriptive Compliance the attic shall be ventilated to provide a minimum free ventilation area of not <br />less than 1 square foot (ft2) of vent area for each 300 square feet (ft2) of attic floor area with a minimum of <br />40 percent to no more than 50 percent upper vents. Ridge vents or gable end vents are recommended to <br />achieve the best performance. The material should be cut to allow for full airflow to the venting. <br />Field <br />Field Name <br />Data Entry 1 <br />Data Entry 2 <br />Data Entry 3 <br />01 <br />Radiant Barrier <br />Yes <br />installed below <br />the roof deck and <br />on all gable end <br />walls <br />02 <br />Comments <br />ROOFING: LIGHT R <br />OF (ASPHALT SHINLES) <br />ROOFDECK: <br />WOOD <br />(E) SIDING/SHEATI <br />G CAVITY/FRAME W/ <br />(N) <br />—30/2X6 <br />CA Building Energy Efficiency Standards - 2022 Residential Compliance <br />January 2022 <br />F <br />REVI <br />PLANS BY: <br />Mas�erlD: <br />Date: R.C. <br />DESIGNS <br />& <br />P.0 BOX. 146 <br />DOWNEY CA. <br />90241 <br />(561) 320-2293 <br />/k9/31 /2024 <br />k'U AR RIOS <br />PROJECT <br />BUILDING DESIGNER <br />These drawings and designs <br />are the property of <br />RC Designs & Drafting Co. <br />and can not be use by <br />others,copied or make <br />reproduction of it, without <br />the written consent of <br />the authors/designers. <br />Notify the designer for <br />any discrepancy or <br />modification. <br />SHEET TITLE: <br />ENERGY <br />CF1 R ADD <br />PROPOSED: <br />GARAGE <br />CONVERSION <br />TO A. D . U <br />IMAM0 <br />HECTOR FLAMENCO <br />(714) 615-7344 <br />PROJECT ADDRESS: <br />1232 S SYCAMORE ST <br />UNIT "2" <br />SANTA ANA CA.92707 <br />DRAWN BY: E.RR <br />ATE 8-31 —24 <br />JOB # RC2024119 <br />D <br />CE <br />S1i3 IT24-1 <br />
The URL can be used to link to this page
Your browser does not support the video tag.