Laserfiche WebLink
THE FOLLOWING ITEMS REQUIRE SHOP DRAWINGS: <br />SHOP DRAWINGS/ SAMPLES <br />1. The Contractor shall submit, with such promptness as to cause no delay in his own work or in that of any other <br />contractor, reproducible shop or setting drawings and schedules required for the work of the various trades, and <br />samples, templates and models as require, and the Architects & CLIENT shall review them with reasonable <br />promptness. <br />2. Field samples and mock-ups shall be prepared at the site by the Contractor as specified in the various sections of <br />the Construction Documents or Client. <br />3. Shop Drawings (SD), Manufacturer's Specifications (MS), or Samples (S) are required for the following items. See <br />Notes on specific items for additional requirements: <br />a) Structural Steel (SD) <br />b) Kitchen, Bathrooms, Miscellaneous and/or Decorative Ironwork. <br />Coordinate with Interior Designer. (SD) (MS) <br />c) Cabinetry, Special Millwork Items. Coordinate with Interior Designer. (SD) (MS) <br />d) Skylights Submit Cut Sheets (SD) (MS) <br />e) Membrane waterproofing provide specs/. Submit cut sheets (MS) <br />f) Marble, Granite and Decorative Stonework. Coordinate with Interior Designer. (MS) (S) <br />g) Steel Stairs (SD) (MS) <br />h) Steel Guardrails, Handrails (MS) <br />i) Waterproofing (Building Enevelope System) (MS) <br />j) Sheet metal, Cove Base, Ceiling Cove (MS) <br />k) Under Floor Ventilation (grilles & openings) (MS) <br />l) ALL STOREFRONTS, Doors and Windows submit Cut Sheets for review. (SD, MS, S) <br />m) Crawlspace Access location & door with lock (MS) <br />n) Low Voltage and Security / Data Systems (MS) <br />o) Flooring Coordinate with ARCHITECT & Interior Designer. (MS, S) <br />p) Mechanical equipment by Contractor. Consult with Client & ARCHITECT (MS) <br />q) Thermostats, Mechanical Registers and Diffusers, Consult with Client (MS) <br />r) Electrical Equipment and Devices Consult with Client. (MS) <br />t) Plumbing Equipment and Devices Consult with Client. (MS) <br />u) Exterior Landscape (Show Plantings per Client review & Approval) including Irrigation. <br />v) Contractor Shall consult with Client for all Paints, Finishes and all Interior Design Items to complete the project. <br />Coordinate with Interior Designer if supplied by Client. <br />4. Review/approval of samples / cut sheets by the Architect & CLIENT shall not be construed as a check for general <br />conformance with the design concept of the work as expressed in the contract documents. The obligation to <br />guarantee dimensions and quantities is solely that of Contractor. <br />5. Where Shop Drawings are required, Contractor shall submit drawings to Architect & CLIENT for approval prior to <br />fabrication or installation. Important: Verify with Architect the time limit for the submission of Shop Drawings. <br />SEE PLAN <br />JAMB SIMILAR <br />INTERIOR <br />HEAD DETAIL <br />W.R. GRACE BITUTHANE UNDER BUILDING PAPER <br />(SEE SPECIFICATIONS) STAPLED TO HEDER TO <br />EXTEND 8" @ OUTSIDE FACE OF WALL. BITUTHANE TO <br />WRAP ALL 4 SIDES OF OPENING OVER NAILING FIN. <br />7/8" EXTERIOR PLASTER W/ (2) LAYERS OF BUILDING <br />PAPER UNDER. VERTICAL WALLS SEE ELEVATIONS FOR <br />FINISH. SEE SPECIFICATIONS. <br />MINIMAL SHEET METAL FLASHING PER <br />SPECIFICATIONS. TURN FLASHING DOWN WALL AT <br />EACH END OF HEADER, RUN 8" DOWN WALL. KEY <br />TO INSIDE OF WINDOW. PROVIDE "J" MOLD AT <br />FRAME. PROVIDE CUT SHEET OF "J" MOLD <br />CAULK AS REQ'D BY WINDOW <br />MANUFACTURER <br />NOTE: <br />ALL WINDOWS TO MATH "STYLE" OF THE LA <br />CANTINA OR FLEETWOOD DOORS AT LIVING, <br />DINING ROOM. CONTRACTOR SHALL VERIFY WITH <br />OWNER OF ALL DOOR & WINDOW STYLES PRIOR <br />TO PLACEMENT OF ORDERS. CONTRACTOR SHALL <br />COORDINATE WITH DOOR & WINDOW <br />MANUFACTURER & WATERPROOFING <br />CONSULTANT FOR INSTALLATION INSTRUCTIONS. <br />EXTERIOR <br />REFER TO FLOOR PLAN <br />FOR DOUBLE WALL @ <br />EXTERIOR WALL <br />CONDITION <br />0' - 5 1/2"VERIFY <br />EDGE OF PLASTER BEYOND OCCURSNOTE: <br />REFER TO EXTERIOR ELEV. FOR <br />VERTICAL & HORIZONTAL WOOD <br />RAINSCREEN DIRECTION. <br />CONTACT THE ARCHITECT FOR <br />CLARIFICATION IF REQUIRED. <br />NOTE: <br />THICKNESS AT IPE WOOD PANEL & PLASTER <br />SYSTEM SHALL MATCH. CONTRACTOR SHALL <br />SUBMIT CONSTRUCTION DETAILING TECHNIQUE <br />FOR ARCHITECT TO PLASTER TRANSITION. INSTALL <br />1/2" ALUMINUM REVEAL AT ALL MATERIAL <br />TRANSITIONS IN PLANE. NO EXCEPTIONS. <br />PRESSURE TREATED WOOD STRIPS NAILED OR <br />SCREWED TO PLYWODD W/ S.S. SCREWS. <br />RAINSCREEN NOTE: <br />CONTRACTOR SHALL USE RAINSCREEN CLIPS IN LIEU <br />OF WD STRIPS IF CLIENT REQUESTS TO HIDE <br />SCREWS APPLICATION AT IPE PANELS. VERIFY W/ <br />CLIENT ACTUAL RAINSCREEN SYSTEM. CONTRACTOR <br />SHALL SUBMIT SHOP DRAWINGS TO ARCHITECT <br />PRIOR TO INSTALLATION. <br />W.R. GRACE BITUTHANE UNDER BUILDING PAPER <br />(SEE SPECIFICATIONS) STAPLED TO HEADER TO <br />EXTEND TO EXTEND 8" @ OUTSIDE FACE OF WALL. <br />BITUTHANE TO WRAP ALL 4 SIDES OF OPENING OVER <br />NAILING FIN. <br />1/8" GAP AT PANELS <br />EXTERIOR GRADE HORIZONTAL IPE PANELS <br />(RAINSCREEN SYSTEM) W/ CONCEALED HARDWARE <br />(RAINSCREEN CLIP) W/ (2) LAYERS OF BUILDING <br />PAPER UNDER VERTICAL WALLS. SEE ELEVATIONS <br />FOR FINISH. VERIFY WITH CLIENT WOOD PANEL <br />SYSTEM AND COLOR. CONTRACTOR SHALL VERIFY <br />WITH PANEL MANUFACTURER INSTALLATIOS AND <br />WATERPROOFING REQUIREMENTS. COTRACTOR <br />SHALL SUBMIT SHOP DRAWINGS TO ARCHITECT <br />PRIOR TO INSTALLATION. <br />IPE TRIM TO MATCH W/ CONCEALED HARDWARE <br />CONTRACTOR TO CONSULT WITH RAINSCREEN <br />MANUFACTURER FOR ALL DETAILING CONDITIONS. <br />SUBMIT SHOP DRAWINGS FOR APPROVALS. <br />SHEET METAL FLASHING PER SPECIFICATIONS. TURN <br />FLASHING DOWN WALL AT EACH END OF HEADER, <br />RUN 8" DOWN WALL. KEY TO INSIDE OF WINDOW. <br />PROVIDE "J" MOLD AT FRAME. <br />CAULK AS REQ'D BY WINDOW MANUFACTURER. <br />SEE EXTERIOR ELEVATIONS & DOOR / WINDOW <br />SCHED FOR WINDOW SYSTEM. <br />JAMB <br />TRIM AT <br />JAMB SIMILAR <br />INTERIOR <br />EXTERIOR <br />HEAD DETAIL <br />W.P. NOTE: INSTALL G.I. <br />FLASHING SELF SEALING <br />MEMBRANE & (2) LAYERS OF <br />BUILDING PAPER AS <br />RECOMMENDED BY MANUF. <br />REFER TO FLOOR PLAN <br />FOR DOUBLE WALL @ <br />EXTERIOR WALL <br />CONDITION <br />PRESSURE TREATED WOOD STRIPS <br />NAILED OR SCREWED TO PLYWOOD <br />S.S. SCREWS <br />OPTIONAL SYSTEM PER MANUF. <br />EXTERIOR GRADE VERTICAL OR HORIZONTAL <br />IPE (SEE EXTERIOR ELEVATIONS) OR OTHER <br />WOOD PANEL SYSTEM (RAIN-SCREEN SYSTEM) <br />W/ CONCEALED HARDWARE (CLIPS) W/ (2) <br />LAYERS OF BUILDING PAPER UNDER VERTICAL <br />WALLS. SEE ELEVATIONS FOR FINISH. VERIFY <br />WITH CLIENT WOOD PANEL SYSTEM AND COLOR. <br />CONTRACTOR SHALL VERIFY WITH PANEL <br />MANUFACTURER INSTALLATION AND <br />WATERPROOFING REQUIREMENTS. <br />CONTRACTOR SHALL SUBMIT SHOP DRAWINGS <br />TO ARCHITECT PRIOR TO INSTALLATION. <br />1/2" ALUM REVEAL <br />7/8" EXTERIOR PLASTER W/ LAYERS OF <br />BUILDING PAPER UNDER. VERTICAL WALLS <br />SEE ELEVATIONS FOR FINISH. SEE <br />SPECIFICATIONS. <br />1/ <br />2 <br />" <br /> <br />R <br />E <br />V <br />E <br />A <br />L <br />(VERIFY) <br />(VERIFY) <br />0' - 0 7/8" <br />0' <br /> <br />- <br /> <br />0 <br /> <br />1 <br />/ <br />2 <br />" <br /> <br />I <br />N <br />C <br />H <br />PLASTER AT WOOD <br />WITH REVEAL DETAIL <br />PLASTER AT STONE VENEER WITH <br />REVEAL DETAIL <br />1/2" ALUM REVEAL <br />STONE VENEER OVER BUILDING <br />PAPER. INSTALL STONE PER <br />MANUF RECOMENDATIONS SEE <br />ELEVATIONS FOR FINISH. <br />7/8" EXTERIOR PLASTER W/ <br />LAYERS OF BUILDING PAPER <br />UNDER. VERTICAL WALLS SEE <br />ELEVATIONS FOR FINISH. SEE <br />SPECIFICATIONS. <br />CONC WALL <br />SEE STRUCTURAL <br />NOTE: <br />REFER TO EXTERIOR ELEV, FOR VERTICAL & HORIZONTAL <br />WOOD RAINSCREEN DIRECTION OR WOOD PANELS / <br />HARDIE SYSTEM. CONTACT THE ARCHITECT FOR <br />CLARIFICATIONS IF REQUIRED. <br />0' - 0 7/8" <br />0' <br /> <br />- <br /> <br />0 <br /> <br />1 <br />/ <br />2 <br />" <br /> <br />I <br />N <br />C <br />H <br />PLASTER AT PLASTER WITH REVEAL DETAIL <br />1/2" ALUM REVEAL <br />7/8" EXTERIOR PLASTER W/ LAYERS <br />OF BUILDING PAPER UNDER. <br />VERTICAL WALLS SEE ELEVATIONS <br />FOR FINISH. SEE SPECIFICATIONS. <br />STOREFRONT SYSTEM <br />SET INMASTIC AND <br />ANCHORED TO SLAB <br />AL <br />I <br />G <br />N <br />W <br />I <br />N <br />D <br />O <br />W <br />/ <br />D <br />O <br />O <br />R <br />DI <br />M <br />E <br />N <br />S <br />I <br />O <br />N <br />INSTALL STOREFRONT <br />PER MANUFACTURER'S <br />RECOMMENDATIONS. <br />EXTERIOR PLASTER <br />SELF-ADHERING FLEXIBLE <br />MEMBRANE FLASHING <br />DRIP FLASHING <br />WATER-RESISTANT <br />BARRIER <br />CASING BEAD <br />4-1/2" THERMALLY BROKEN <br />ALUMINUM STOREFRONT <br />SYSTEM, OUTSIDE GLAZED <br />SHIM AS REQUIRED <br />SEALANT AND <br />BACKER ROD <br />F.O. <br />FRAME <br />1 <br />2 <br />3 <br />4 <br />5 <br />6 <br />TYPICAL <br />WATER <br />PROOFING <br />AT WEEP <br />LM60 <br />12" GRACE "ICE" <br />12" COPPER <br />WEEP SCREED <br />12" GRACE "ICE" <br />BUILDING PAPER <br />CONCRETE FOOTING PER <br />STRUCTURAL PLANS <br />5/8" TYPE 'X' GYP. BOARD <br />STUD WALL REFER TO PLAN <br />7/8" EXTERIOR PLASTER OR WOOD SIDING W/ <br />(2) LAYERS OF BUILDING PAPER UNDER <br />VERTICAL WALLS SEE ELEVATIONS FOR <br />FINISH, SEE SPECIFICATIONS. <br />*NOTE: REFER TO EXTERIOR BUILDING <br />ELEVATIONS FOR EXTERIOR MATERIAL " PLASTER <br />OR WOOD FINISH" "IPE WOOD" REFER TO DETAIL <br />A-7 SERIES FOR WOOD RAINSCREEN SYSTEM AS <br />OCCURS. VERIFY EXTERIOR MATERIALS W/ <br />CLIENT FOR APPROVAL. CONACT ARCHITECT FOR <br />ANY PROPOSED CHANGES. <br />PLYWOOD SHEATHING PER STRUCTURAL <br />CONTINUOUS SHEET METAL WEEP SCREED PAINT <br />TO MATCH WALLS. AVOID CONTACT W/ DISSIMILAR <br />METALS. WHERE WEEP SCREED IS MORE THAN 8" <br />BELOW SILL PLATE. SLIP SHEET JOINT W/ 24" W.R. <br />GRACE + 24" DIAMOND LATH OVER LATH, INSTALL <br />PER MANUF SPECIFICATIONS. <br />NOTE: Weep Screed shall be 4 inches (102 mm) above <br />the natural ground or 2 inches (51 mm) above paved <br />areas. The screed should be made of a corrosion- <br />resistant material and allow trapped water to drain <br />outside the building. The exterior lath should cover and <br />end on the screed's attachment flange <br />FINISH GRADE. CONCRETE OR <br />PAVERS PER LANDSCAPE. SLOPE <br />MIN. 2% AWAY FROM BUILDING. <br />INSTALL PER MANUFACTURER <br />SPECIFICATIONS <br />SHEET METAL FLASHING @ PLYWOOD <br />SEE STRUC <br />2% SLOPE <br />WOOD SUPPORTED BY EXTERIOR FOUNDATION WALLS: <br />WOOD FRAMING MEMBERS,INCLUDING WOOD SHEATHING, <br />THAT REST ON EXTERIOR FOUNDATION WALLS AND ARE <br />LESS THAN 8" FROM EXPOSED EARTH SHALL BE OF <br />NATURALLY DURABLE OR PRESERVATIVE-TREATED WOOD <br />FINISH FLOOR PER <br />CLIENT DIRECTION <br />0' <br /> <br />- <br /> <br />8 <br />" <br />0' <br /> <br />- <br /> <br />4 <br />" <br />1HR FIRE RATED EXTERIOR PLASTER <br />WALL ASSEMBLY COMPLIES WITH: <br />UL DESIGN NO. U371 <br />FIN. FLR. <br />4" <br /> <br />@ <br /> <br />G <br />r <br />o <br />u <br />n <br />d <br />2" <br /> <br />@ <br /> <br />P <br />a <br />v <br />e <br />d <br />WATERPROOFING 24" <br />BITUTHANE STRIP, 12" <br />ABOVE GRADE, 12" BELOW <br />STAINLESS STEEL OR G.I. <br />PER CONTACTOR <br />Scale <br />Date <br />Drawn By <br />Checked By <br />Project Number <br />14 <br />3 <br />0 <br /> <br />E <br /> <br />E <br />D <br />I <br />N <br />G <br />E <br />R <br /> <br />A <br />V <br />E <br />, <br /> <br />S <br />A <br />N <br />T <br />A <br /> <br />A <br />N <br />A <br />, <br /> <br />C <br />A <br /> <br />9 <br />2 <br />7 <br />0 <br />5 <br />NOVUM <br />A R C H I T E C T U R E, Inc <br />www.novumarchitecture.com <br />OFFICES: SOUTH BAY / ORANGE COUNTY <br />116 S CATALINA AVE. STE. 122, <br />REDONDO BEACH, CA 90277 <br />TEL: 310-383-1827 / 310-709-4476 <br />N <br />DARIAN <br />RADAC <br />NO. C-33451 <br />RENEWAL DATE <br />LICENSED <br />STA <br />OE <br />CETIHCRA <br />T <br />T <br />F <br />INR <br />I O <br />CALF <br />A2-28-2025 <br />Darian Radac <br />As indicated <br />A-019 <br />TO <br />M <br />' <br />S <br /> <br />J <br />R <br />Checker <br />Author <br />9-03-2024 <br />tom's2023 <br />Ar <br />c <br />h <br />i <br />t <br />e <br />c <br />t <br />u <br />r <br />a <br />l <br /> <br />D <br />e <br />t <br />a <br />i <br />l <br />s <br />Mr <br />. <br /> <br />S <br />p <br />i <br />r <br />o <br />s <br /> <br />P <br />o <br />l <br />i <br />t <br />i <br />s <br />1 1/2" = 1'-0"0 SHOP DRAWING LIST & REQUIREMENTS <br />3" = 1'-0"4 WINDOW AT PLASTER SYSTEM <br />3" = 1'-0"1 WINDOW AT WOOD SIDING / IPE WOOD <br />No. Description Date <br />3" = 1'-0"5 Standard Aluminum Reveal Detail <br />6" = 1'-0"3 STOREFRONT DETAIL <br />3" = 1'-0"2 SLAB ON GRADE FOUNDATION <br />1430 E Edinger Ave <br />3/27/2025