Laserfiche WebLink
ST. BARBARA CATHOLIC SCHOOL TASK 2 75-24272-01 <br />DIOCESE OF ORANGE SEPTEMBER 12TH, 2024 <br />SANTA ANA, CA BID & PERMIT SET <br /> <br />CONSTRUCTION WASTE MANAGEMENT AND DISPOSAL 017419 - 3 <br />1.7 QUALITY ASSURANCE <br />A. Waste Management Coordinator Qualifications: Experienced firm, or individual employed and <br />assigned by General Contractor, with a record of successful waste management coordination of <br />projects with similar requirements. Superintendent may not serve as Waste Management <br />Coordinator. <br />B. Regulatory Requirements: Comply with transportation and disposal regulations of authorities <br />having jurisdiction. <br />C. Waste Management Conference(s): Conduct conference(s) at Project site to comply with <br />requirements in Section 013100 "Project Management and Coordination." Review methods and <br />procedures related to waste management including, but not limited to, the following: <br />1. Review and discuss waste management plan including responsibilities of each contractor <br />and waste management coordinator. <br />2. Review requirements for documenting quantities of each type of waste and its <br />disposition. <br />3. Review and finalize procedures for materials separation and verify availability of <br />containers and bins needed to avoid delays. <br />4. Review procedures for periodic waste collection and transportation to recycling and <br />disposal facilities. <br />5. Review waste management requirements for each trade. <br />1.8 WASTE MANAGEMENT PLAN <br />A. General: Develop a waste management plan according to requirements in this Section. Plan <br />shall consist of waste identification, waste reduction work plan, and cost/revenue <br />analysis. Distinguish between demolition and construction waste. Indicate quantities by weight <br />or volume, but use same units of measure throughout waste management plan. <br />B. Waste Identification: Indicate anticipated types and quantities of demolition site-clearing and <br />construction waste generated by the Work. Use Form CWM-1 for construction waste and <br />Form CWM-2 for demolition waste. Include estimated quantities and assumptions for estimates. <br />C. Waste Reduction Work Plan: List each type of waste and whether it will be salvaged, recycled, <br />or disposed of in landfill or incinerator. Use Form CWM-3 for construction waste and <br />Form CWM-4 for demolition waste. Include points of waste generation, total quantity of each <br />type of waste, quantity for each means of recovery, and handling and transportation procedures. <br />1. Salvaged Materials for Reuse: For materials that will be salvaged and reused in this <br />Project, describe methods for preparing salvaged materials before incorporation into the <br />Work in compliance with Section 024116 "Structure Demolition" and Section 024119 <br />"Selective Demolition." <br />2. Salvaged Materials for Sale: For materials that will be sold to individuals and <br />organizations, include list of their names, addresses, and telephone numbers. <br />3. Salvaged Materials for Donation: For materials that will be donated to individuals and <br />organizations, include list of their names, addresses, and telephone numbers.