Laserfiche WebLink
ST. BARBARA CATHOLIC SCHOOL TASK 2 75-24272-01 <br />DIOCESE OF ORANGE SEPTEMBER 12TH, 2024 <br />SANTA ANA, CA BID & PERMIT SET <br /> <br />CONSTRUCTION WASTE MANAGEMENT AND DISPOSAL 017419 - 9 <br />E. Asphalt Shingle Roofing: Separate organic and glass-fiber asphalt shingles and felts. Remove <br />and dispose of nails, staples, and accessories. <br />F. Gypsum Board: Stack large clean pieces on wood pallets or in container and store in a dry <br />location. Remove edge trim and sort with other metals. Remove and dispose of fasteners. <br />G. Acoustical Ceiling Panels and Tile: Stack large clean pieces on wood pallets and store in a dry <br />location. <br />H. Metal Suspension System: Separate metal members, including trim and other metals from <br />acoustical panels and tile, and sort with other metals. <br />I. Carpet and Pad: Roll large pieces tightly after removing debris, trash, adhesive, and tack strips. <br />1. Store clean, dry carpet and pad in a closed container or trailer provided by carpet <br />reclamation agency or carpet recycler. <br />J. Carpet Tile: Remove debris, trash, and adhesive. <br />1. Stack tile on pallet and store clean, dry carpet in a closed container or trailer provided by <br />carpet reclamation agency or carpet recycler. <br />K. Piping: Reduce piping to straight lengths and store by material and size. Separate supports, <br />hangers, valves, sprinklers, and other components by material and size. <br />L. Conduit: Reduce conduit to straight lengths and store by material and size. <br />M. Lamps: Separate lamps by type and store according to requirements in 40 CFR 273. <br />3.5 RECYCLING CONSTRUCTION WASTE <br />A. Packaging: <br />1. Cardboard and Boxes: Break down packaging into flat sheets. Bundle and store in a dry <br />location. <br />2. Polystyrene Packaging: Separate and bag materials. <br />3. Pallets: As much as possible, require deliveries using pallets to remove pallets from <br />Project site. For pallets that remain on-site, break down pallets into component wood <br />pieces and comply with requirements for recycling wood. <br />4. Crates: Break down crates into component wood pieces and comply with requirements <br />for recycling wood. <br />B. Wood Materials: <br />1. Clean Cut-Offs of Lumber: Grind or chip into small pieces. <br />2. Clean Sawdust: Bag sawdust that does not contain painted or treated wood. <br />C. Gypsum Board: Stack large clean pieces on wood pallets or in container and store in a dry <br />location.