Laserfiche WebLink
ST. BARBARA CATHOLIC SCHOOL TASK 2 75-24272-01 <br />DIOCESE OF ORANGE SEPTEMBER 12TH, 2024 <br />SANTA ANA, CA BID & PERMIT SET <br /> <br />CAST-IN-PLACE CONCRETE 033000 - 1 <br />SECTION 033000 - CAST-IN-PLACE CONCRETE <br />PART 1 - GENERAL <br />1.1 SUMMARY <br />A. Section includes cast-in-place concrete, including formwork, reinforcement, concrete materials, <br />mixture design, placement procedures, and finishes. <br />1.2 ACTION SUBMITTALS <br />A. Product Data: For each type of product. <br />B. Design Mixtures: For each concrete mixture. <br />C. Steel Reinforcement Shop Drawings: Placing Drawings that detail fabrication, bending, and <br />placement. <br />1.3 INFORMATIONAL SUBMITTALS <br />A. Material certificates. <br />B. Material test reports. <br />C. Formwork Shop Drawings: Prepared by or under the supervision of a qualified professional <br />engineer, detailing fabrication, assembly, and support of formwork. <br />1.4 QUALITY ASSURANCE <br />A. Manufacturer Qualifications: A firm experienced in manufacturing ready-mixed concrete <br />products and that complies with ASTM C 94/C 94M requirements for production facilities and <br />equipment. <br />1. Manufacturer certified according to NRMCA's "Certification of Ready Mixed Concrete <br />Production Facilities." <br />B. Testing Agency Qualifications: An independent agency, acceptable to authorities having <br />jurisdiction, qualified according to ASTM C 1077 and ASTM E 329 for testing indicated. <br />1.5 PRECONSTRUCTION TESTING <br />A. Preconstruction Testing Service: Engage a qualified testing agency to perform preconstruction <br />testing on concrete mixtures.