Laserfiche WebLink
ST. BARBARA CATHOLIC SCHOOL TASK 2 75-24272-01 <br />DIOCESE OF ORANGE SEPTEMBER 12TH, 2024 <br />SANTA ANA, CA BID & PERMIT SET <br /> <br />DIMENSIONAL LETTER SIGNAGE 101419 - 2 <br />B. Sample Warranty: For special warranty. <br />1.7 QUALITY ASSURANCE <br />A. Installer Qualifications: An entity that employs installers and supervisors who are trained and <br />approved by manufacturer. <br />1.8 FIELD CONDITIONS <br />A. Field Measurements: Verify locations of electrical service embedded in permanent construction <br />by other installers by field measurements before fabrication and indicate measurements on Shop <br />Drawings. <br />1.9 WARRANTY <br />A. Special Warranty: Manufacturer agrees to repair or replace components of signs that fail in <br />materials or workmanship within specified warranty period. <br />1. Failures include, but are not limited to, the following: <br />a. Deterioration of finishes beyond normal weathering. <br />b. Separation or delamination of sheet materials and components. <br />2. Warranty Period: Five years from date of Substantial Completion. <br />PART 2 - PRODUCTS <br />2.1 PERFORMANCE REQUIREMENTS <br />A. Electrical Components, Devices, and Accessories: Listed and labeled as defined in NFPA 70, by <br />a qualified testing agency, and marked for intended location and application. <br />2.2 DIMENSIONAL CHARACTERS <br />A. Cast/Cutout Characters: Characters with uniform faces, sharp corners, and precisely formed lines <br />and profiles, and signs as follows: <br />1. Manufacturers: Subject to compliance with requirements, provide products by one of the <br />following, or equal: <br />a. ACE Sign Systems, Inc. <br />b. Allen Markings. <br />c. APCO Graphics, Inc. <br />d. ASI Sign Systems, Inc. <br />e. Gemini Incorporated.