Laserfiche WebLink
ST. BARBARA CATHOLIC SCHOOL TASK 2 75-24272-01 <br />DIOCESE OF ORANGE SEPTEMBER 12TH, 2024 <br />SANTA ANA, CA BID & PERMIT SET <br /> <br />ASPHALT PAVING 321216 - 4 <br />C. Prime Coat: Grade SC-70 liquid asphalt conforming to section 203-2 of the Reference <br />Specification. <br />D Tack Coat: Emulsified asphalt grade SS-1h conforming to section 203-3 of the Reference <br />Specification. <br /> <br />E. Asphalt Paint: Conform to ASTM D41 or D43 per section 203-8 of the Reference <br />Specification. <br /> <br />F. Slurry Seal: Emulsified asphalt grade [SS-1h] [CSS-1h] and aggregate conforming to section <br />203.5 of the Reference Specification. <br /> <br />G. Asphalt Cement: ASTM D 3381 for viscosity-graded material; ASTM D 946 for penetration- <br />graded material. <br /> <br />H. Asphalt Cement: ASTM D 3381 for viscosity-graded material. <br /> <br />I. Undersealing Asphalt: ASTM D 3141, pumping consistency. <br /> <br />J. Prime Coat: ASTM D 2027; medium-curing cutback asphalt; MC-30, MC-70, or MC-250. <br /> <br />K. Prime Coat: Asphalt emulsion prime conforming to state DOT requirements. <br /> <br />L. Prime Coat: ASTM D 977, emulsified asphalt or ASTM D 2397, cationic emulsified asphalt, <br />slow setting, factory diluted in water, of suitable grade and consistency for application. <br /> <br />M. Tack Coat: ASTM D 977, emulsified asphalt or ASTM D 2397, cationic emulsified asphalt, <br />slow setting, factory diluted in water, of suitable grade and consistency for application. <br /> <br />N. Fog Seal: ASTM D 977, emulsified asphalt or ASTM D 2397, cationic emulsified asphalt, <br />slow setting, factory diluted in water, of suitable grade and consistency for application. <br /> <br />O. Water: Potable. <br /> <br />2.3 AUXILIARY MATERIALS <br /> <br />A. Herbicide: Commercial chemical for weed control, registered by Environmental Protection <br />Agency (EPA). Provide granular, liquid, or wettable powder form. <br /> <br />B. Sand: ASTM D 1073, Grade Nos. 2 or 3. <br /> <br />C. Paving Geotextile: Nonwoven polypropylene, specifically designed for paving applications, <br />resistant to chemical attack, rot, and mildew. <br /> <br />D. Pavement-Marking Paint: Alkyd-resin type, ready-mixed, complying with FS TT-P-115, <br />Type I, or AASHTO M-248, Type N. <br /> <br />E. Pavement-Marking Paint: Latex, water-base emulsion, ready-mixed, complying with FS TT- <br />P-1952. <br />1. Color: As indicated. <br />2. Color: White (for parking stalls, other than handicapped). <br />2. Color: Yellow (for parking stalls, other than handicapped). <br />3. Color: Blue (for pavement markings identifying handicap parking)