Laserfiche WebLink
www.hilti.com <br />Hilti PROFIS Engineering 3.1.14 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2025 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />10 <br />Company: <br />Address: <br />Phone I Fax: <br />Design: <br />Fastening point: <br /> | <br />DLX8 Transformer ANCHORAGE <br />Page: <br />Specifier: <br />E-Mail: <br />Date: <br />10 <br />4/15/2025 <br />7 Installation data <br /> Anchor type and diameter: HIT-RE 500 V3 + HAS-V-36 <br /> (ASTM F1554 Gr.36) 5/8 <br /> Profile: - Item number: 2198026 HAS-V-36 5/8"x10" (element) / <br /> 2123401 HIT-RE 500 V3 (adhesive) <br /> Hole diameter in the fixture: - Maximum installation torque: 720 in.lb <br /> Plate thickness (input): - Hole diameter in the base material: 0.750 in. <br /> Hole depth in the base material: 9.000 in. <br /> Drilling method: Hammer drilled Minimum thickness of the base material: 10.500 in. <br /> Cleaning: Compressed air cleaning of the drilled hole according to instructions <br /> for use is required <br /> Hilti Æ 5/8 in HIT-RE 500 V3 + HAS-V-36 (ASTM F1554 Gr.36) with 9 in nominal embedment depth per ICC-ES ESR-3814 , Hammer drill bit <br /> installation per MPII <br />7.1 Recommended accessories <br />Drilling Cleaning Setting <br />• Suitable Rotary Hammer <br />• Properly sized drill bit <br />• Compressed air with required accessories <br /> to blow from the bottom of the hole <br />• Proper diameter wire brush <br />• Dispenser including cassette and mixer <br />• Torque wrench <br />Coordinates Anchor in. <br />Anchor x y c-x c+x c-y c+y <br />1 0.000 0.000 6.000 -6.000 - <br />S-45