Laserfiche WebLink
City of Santa Ana Public Library Renovation <br />Smith, Fause & McDonald Inc.Group 4 Architecture Research + Planning, Inc. <br />Conform SetASI #026 – August 72, 20254 Group 4 Project No. 22575-01 <br />SECTION 27 4116-16 INTEGRATED AUDIOVISUAL SYSTEMS AND EQUIPMENT <br />2.5 ROOM SCHEDULING SYSTEM <br />A.General: Provide hardware Room Scheduling Panels, frames/mounts, cabling, raceways, and <br />programming at Room Scheduling Panel locations shown on plans. Confirm compatibility of <br />submitted hardware panel with City/Library scheduling software. <br />B.Drawing Reference: RSP <br />1.Features/Requirements: <br />2.Compatible with Library/City Scheduling Software <br />3.Manufacturer: <br />a.Crestron TSW-770 <br />b.Or equal <br />2.6 CONTROL SYSTEM, SWITCHING AND RELATED <br />A.General <br />1.Products provide under this Section shall be made by manufacturers regularly <br />engaged in the production of programmable commercial audio-visual control <br />systems. Such manufacturers shall have at least 5 years prior production experience <br />in the manufacture of such goods. <br />2.Provide control system to perform functions scheduled on drawings and herein. <br />a.System to be field programmable. <br />b.Provide programming allowance to implement system as required to provide <br />the functionality indicated herein and as defined by the City during design <br />and construction phase meetings, including closely matching the user <br />interface of the existing control panels used elsewhere at the City in style, <br />color and organization to the extent directed by the City’s Representative. <br />3.In addition to providing programming to meet the requirements outlined in part one of <br />this specification section and as outlined by the City during the reconstruction <br />programming meetings, Contractor to provide an allowance of up to $6000 to <br />implement new functions in the audiovisual systems programming identified by the <br />City after the substantial completion of this project. Allowance may not be expended <br />by the Contractor in completing the base bid scope of work including Warranty defect <br />items. <br />B.Control Processor <br />1.Drawing References: CONTROL <br />a.Control4 <br />b.CBlock <br />c.Control PS - A/V Net power supply <br />2.Features/Functions/Performance: <br />a.Control System shall utilize a processor at no less that of sufficient capacity <br />to provide the indicated control functions without degradation due to system <br />overload. <br />b.I/O Ports: <br />1)At least 3 RS-232/422/485 Ports. <br />2)At least 8 IR/Serial Ports. <br />3)At least 8 Isolated Relay Ports <br />4)At least 8 I/O Ports. <br />5)At least 1 Port for the control system manufacturer's proprietary A/V <br />network. <br />6)At least 1 TCP/IP Ethernet Network connection via an RJ-45 <br />connector. <br />c.Control System shall be fully compatible with the control system <br />manufacturer's projector and A/V equipment status monitoring and