My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
26 Civic Center Plz - REV 6 - Plan
PBA
>
Building
>
ProjectDox
>
C
>
Civic Center Plz
>
26 Civic Center Plz
>
26 Civic Center Plz - REV 6 - Plan
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
2/25/2026 1:27:25 PM
Creation date
2/25/2026 1:26:58 PM
Metadata
Fields
Template:
Plan
Permit Number
20181364
20184057
30146548
40138556
40139543
101117272
101117273
101117274
101117275
101117276
101117286
101120941
101121751
Full Address
26 Civic Center Plz
Street Number
26
Street Name
Civic Center
Street Suffix
Plz
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
200
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
City of Santa Ana Public Library Renovation <br />Group 4 Architecture Research + Planning, Inc.Smith, Fause & McDonald Inc. <br />Group 4 Project No. 22575-01 Conform Set – August 2, 2024Bid Set Addendum-03 – June 05 <br />INTEGRATED AUDIOVISUAL SYSTEMS AND EQUIPMENT SECTION 27 4116-61 <br />g.Or equal. <br />5.Manufacturers, Decora/Decorator connector inserts: <br />a.Connector Plates by Radio Design Labs. Provide specified connectors rear <br />mounted in D-Blank insert for connector combinations not available from <br />RDL. <br />b.Grey by Pathway Connectivity Solutions. Provide specified connectors rear <br />mounted in 5100 insert for connector combinations not available from <br />Pathway Connectivity Solutions. <br />6.Manufacturers, Rack Mount Decora Panel Openings <br />a.Lowell Manufacturing LD8-RMP with Lowell DBB-4 blank Decora plates at <br />openings not fitted with equipment. <br />b.Middle Atlantic DECP Series <br />c.Or equal. <br />2.16 POWER DISTRIBUTION EQUIPMENT: <br />A.Comply with applicable Codes. Provide UL Listed devices suitable for commercial use. <br />Provide all junction boxes, raceway, fittings, wire, supports and fastenings as required for <br />complete installation. Contractor to coordinate plug end of selected strip with rack power <br />receptacles installed under the work of Division 16. Unless otherwise noted, provide <br />receptacles of NEMA 5-15R configuration. <br />B.Power Sequencer System <br />1.Drawing References: PWR-SEQ <br />a.Power Sequencer <br />b.Fire Alarm Interface – provide where required to shunt system operation on <br />receipt of closure from Fire Alarm system. <br />c.Sold State Relay (SSR) SSR1 through SSR7 <br />2.Features <br />a.Power sequencing system. <br />b.Solid state switching, zero crossing. <br />c.Sequencing on power up and power down. <br />d.Front panel button and external closure activation. <br />e.Alarm terminal to sequence the system down when tripped. <br />f.UL Listed. <br />3.Manufacturer <br />a.FSR Inc. Power Products Group SPC-20 Power Sequencer and SPC-20X <br />Solid State Relay <br />b.Furman <br />c.Or equal. <br />C.UPS, Rack Mounted, 1400 VA <br />1.Drawing Reference: UPS10 <br />2.Features/Functions/Performance: <br />a.Provide continuous, no-break power with sine wave output. <br />b.Size to carry connected load at least 10 minutes following loss of power, after <br />at least two hours of charge time. <br />c.Provide Transient Over-Voltage (TOV) Surge Suppression; comply with <br />ANSI/IEEE C62.41-1980, Category A and Category B. <br />d.Provide complete isolation from Line. <br />e.Provide output voltage regulation to ANSI C84.1 for computing equipment. <br />f.SNMP manageable and status reporting to City's Management console. <br />Provide output KVA, switch-mode power supply rated, not less than 150% of <br />connected load indicated. <br />g.Rack Mounted
The URL can be used to link to this page
Your browser does not support the video tag.