1411 N Durant St - Plan - Laserfiche WebLink

Home Browse Search

D:\PROJECTS\JAN\13\ROSS & DURANT I\CAD FILE\ROSS & DURANT I_PVPLANS_VA - STANDARD\ROSS & DURANT I_PVPLANS_VA.DWG SITE PLACARDS CONTRACTOR: ENGINEERING APPROVAL: 600 CALIFORNIA ST #1800, SAN FRANCISCO, CA 94104 CA CL #750184 UNAUTHORIZED USE OF THIS DRAWING SET WITHOUT WRITTEN PERMISSION FROM CONTRACTOR IS IN VIOLATION OF U.S. COPYRIGHT LAWS AND WILL BE SUBJECT TO CIVIL DAMAGES AND PROSECUTIONS. ROSS & DURANT I 1411 N DURANT ST, SANTA ANA, CA 92706, USA APN:398-522-25 DEVELOPER: C&C DEVELOPMENT DESCRIPTION DATE REV 0ORIGINAL07/28/25 AAHJ COMMENTS 10/17/25 CEQUIPEMENT LOCTION CHANGED 01/13/25 PROJECT DETAILS: PV SYSTEM: ·44.28 kW DC ·34.6 kW AC ·40.64 CEC AC E810 SHEET SIZE: REVISION: SHEET TITLE: 36" X 24" (ARCH D) DESIGNER: FINS_SA C CONTRACT NUMBER: 3003200668 PJT #: PROP-002087 BBESS REMOVED 12/03/25 D:\PROJECTS\JAN\13\ROSS & DURANT I\CAD FILE\ROSS & DURANT I_PVPLANS_VA - STANDARD\ROSS & DURANT I_PVPLANS_VA.DWG MULTIPLE SOURCES OF POWER IS SUPPLIED TO THIS BUILDING WITH DISCONNECTS AS SHOWN CAUTION: 1411 N DURANT ST, SANTA ANA, CA 92706, USA DIRECTORY PERMANENT PLAQUE OR DIRECTORY PROVIDING THE LOCATION OF THE SERVICE DISCONNECTING MEANS AND THE PHOTOVOLTAIC SYSTEM DISCONNECTING MEANS IF NOT IN THE SAME LOCATION [NEC 690.56(B)] WHERE THE INVERTERS ARE REMOTELY LOCATED FROM EACH OTHER, A DIRECTORY IN ACCORDANCE WITH 705.10 SHALL BE INSTALLED AT EACH DC PV SYSTEM DISCONNECTING MEANS, AT EACH AC DISCONNECTING MEANS, AND AT THE MAIN SERVICE DISCONNECTING MEANS SHOWING THE LOCATION OF ALL AC AND DC PV SYSTEM DISCONNECTING MEANS IN THE BUILDING. [NEC 690.4(D)] POI-1 AC DISCONNECT (NON-FUSED) (EXT.) NGO METER (EXT.) AC DISCONNECT (FUSED) (EXT.) TENANT METERS (EXT.) POI LOCATION (EXT.) PV INVERTER (EXT.) NGOM M SCE LINE SIDE DISCONNECT GENERATION LOAD SIDE DISCONNECTUTILITY DISTRIBUTION SYSTEM 1 3 8 2 7 9 PV GENERATION FACILITY 46 5 SCE LINE SIDE DISCONNECT LABEL LOCATION: LINE SIDE DISCONNECT LABEL LOCATION: LOAD SIDE DISCONNECT LABEL LOCATION: IF PANEL MODIFICATIONS ARE MADE APPROPRIATE PLACARDS MUST BE INSTALLED LABELING THE SECTIONS. 1 2 7 LABEL LOCATION: THE WIRING SEQUENCE OF FACTORY-INSTALLED TEST-BYPASS BLOCKS, FROM LEFT TO RIGHT, IS LINE-LOAD, LINE-LOAD, LINE-LOAD. THIS WIRING SEQUENCE SHALL BE PERMANENTLY LABELED IN 3/4-INCH BLOCK LETTERS BELOW THE TEST-BYPASS TERMINALS. LINE AND LOAD CONDUCTORS SHALL BE CONNECTED ONLY TO TEST-BYPASS BLOCK TERMINALS DESIGNED AS LINE AND LOAD, RESPECTIVELY. 3 LABEL LOCATION: ON THE METER PANEL OR ADJACENT TO THE METER SOCKET. ACCEPTABLE METHODS FOR LABELING CUSTOMER NGO METERING SECTIONS OR PANEL(S) SHALL BE EITHER BY PERMANENTLY ATTACHED MACHINE-ENGRAVED LAMINATED PHENOLIC (OR EQUAL) TAGS OR BY PERMANENT STENCILED PAINT LETTERING. TEXT HEIGHT MIN. 1/4". 8 SCE METERING PLACARDS NTS SOLAR INTERCONNECTION TERMINATION SECTION LINE LOAD SCE UTILITY TERMINATION SECTION DISCONNECT 1 OF 2 GENERATION LOAD SIDE DISCONNECT DISCONNECT 2 OF 2 NET GENERATION OUTPUT METERING NOTE: SCE REQUIRES A SAFETY-SOCKET BOX WITH FACTORY-INSTALLED TEST-BYPASS BLOCKS FOR NON-INSTRUMENT RATED (SELF-CONTAINED) NGO METERING. FOR SWITCHBOARDS/SWITCHGEAR, THE CUSTOMER MUST LABEL THE GENERATOR OUTPUT BUS/CABLE DIRECTION (E.G., "TOP GENERATOR FED"). IF NGO AND PCC METERING ARE SEPARATED BY OVER 100 FEET OR ON DIFFERENT LEVELS, A PERMANENT SIGN AT THE PCC METER MUST INDICATE THE NGO METER'S LOCATION. CURRENT FLOW LABEL LOCATION: FOR INSTRUMENT TRANSFORMER RATED CT NGOM PANELS, THE ARROW POINTING TOWARDS THE UTILITY SIDE DISCONNECT SHALL BE INSTALLED ON THE INSIDE SIDE WALL OF PANEL OR ON THE OUTSIDE FRONT OF NGOM PANEL. 5 SCE LINE SIDE PV LOAD SIDE LABEL LOCATION: PULL SECTIONS 4 GRID GENERATION LABEL LOCATION: GRID AND GENERATION CONDUCTORS 6 LABEL LOCATION: PLACE A UNIQUE ADDRESS PLACARD ON THE NGOM THAT MATCHES THE AHJ PERMIT AND THE SCE SERVICE REQUEST ADDRESS. 9 123 MAIN ST. SOMAH1 NOTE: IF INTERCONNECTION IS MADE WITHIN A NEW TERMINATION CAN, THE "SOLAR INTERCONNECTION TERMINATION SECTION" PLACARD IS REQUIRED C 12-31-26