Laserfiche WebLink
CA Building Energy Efficiency Standards - 2019 Nonresidential Compliance:http://www.energy.ca.gov/title24/2019standards March 2021 <br />STATE OF CALIFORNIA <br />Sign Lighting <br />NRCC-LTS-E (Created 03/2021) CALIFORNIA ENERGY COMMISSION <br />Page 1 of 4 <br />CERTIFICATE OF COMPLIANCE NRCC-LTS-E <br />This document is used to demonstrate compliance with requirements in §110.9,§110.12,§130.0,§130.3,§140.8, and §141.0(b)2M for sign lighting scopes using the prescriptive <br />path. Exit signs and traffic signs are not required to comply with prescriptive requirements per exceptions to §140.8 and do not need to complete this compliance document. <br />Project Name:La Victoria Cocina Mexicana Report Page: <br />Project Address:1620 E. 1st St.Date Prepared:3/4/2026 <br />A. GENERAL INFORMATION <br />01 Project Location (city)Santa Ana <br />02 Climate Zone 88 <br />03 Building is a healthcare facility <br />B. PROJECT SCOPE <br />Table Instructions: Include any illuminated signs that are within the scope of the permit application and are demonstrating compliance using the prescriptive path outlined in § <br />140.8 or §141.0(b)2M for alterations. Exit signs and traffic signs are not required to comply with prescriptive requirements per exceptions to §140.8 and do not need to complete <br />this compliance document. WARNING: Changing the Compliance Method in this table will result in the deletion of data previously input. If you need to change the compliance <br />method, please open a new form or use "Save As". <br />01 <br />Name or <br />Item Tag <br />02 <br />Complete Sign Description <br />03 <br />Sign Status¹ <br />04 <br />Sign Type <br />05 <br />Compliance Method² <br />New sign internally illuminated channel <br />letter NewNew OutdoorOutdoor Max Allowed Lighting PowerMax Allowed Lighting Power <br />¹FOOTNOTE: Sign alterations that increase the connected lighting load, replace and rewire more than 50% of the ballasts, or relocate the sign to a different location must comply <br />with §140.8. See §141.0(b)2M for more details. <br />²The ENERGY VERIFIED Label compliance method is only applicable if the sign has a permanent, factory-installed, ENERGY VERIFIED label certified by UL or comparable, <br />confirming the sign complies with §140.8. Note that using an ENERGY VERIFIED label is an optional compliance path, not a mandatory requirement. See the tool tips for this <br />table for more details. <br />C. COMPLIANCE RESULTS <br />Table Instructions: If any cell on this table says "DOES NOT COMPLY" or "COMPLIES with Exceptional Conditions" refer to Table D. for guidance. <br />Name or <br />Item Tag <br />(See Table B) <br />01 <br />(See Table B) <br />Complete Sign Description <br />02 <br />(See Table F) <br />Total Allowed <br />(Watts) <br />03 <br />≥ <br />(See Table F) <br />Total Designed <br />(Watts) <br />04 <br />OR <br />(See Table G) <br />Compliant Light <br />Sources <br />05 <br />OR <br />(See Table H) <br />ENERGY VERIFIED <br />Label <br />06 <br />Compliance Results <br />07 <br />New sign internally illuminated channel letter 903.36 ≥485 OR OR COMPLIES <br />Controls Compliance (See Table F/G/H for Details)COMPLIES with Exceptional Conditions