Laserfiche WebLink
COVER PAGE <br />SHEET TITLE <br />SHEET NUMBER <br />STAMP <br />PV1.0 (TITLE) <br />A2/2/2026FOR REVIEW <br />REVDATEDESCRIPTION <br />REVISIONS <br />24"X36" <br />16 <br />6 <br />1 <br /> <br />E <br />16 <br />6 <br />1 <br /> <br />E <br /> <br />S <br />T <br /> <br />A <br />N <br />D <br />R <br />E <br />W <br /> <br />P <br />L <br />, <br />SA <br />N <br />T <br />A <br /> <br />A <br />N <br />A <br /> <br />9 <br />2 <br />7 <br />0 <br />5 <br />AH <br />J <br />: <br /> <br />SA <br />N <br />T <br />A <br /> <br />A <br />N <br />A <br />PR <br />O <br />J <br />E <br />C <br />T <br />358 Coral Circle, El Segundo, CA 90245 <br />Ben Lochtenberg <br />CSLB C10 License # 992157 <br />Phone No: (310) 376-8740 <br />DRAWN BY <br />A. CRUZ <br />PROJECT ENGINEER <br />ENGINEERING@XEROSOLAR.COM <br />SCOPE OF WORK: <br />(55) PV MODULES (LONGI LR5-72HBD-545M) <br />SYSTEM SIZE: (29.975) kW DC STC, (27.069) <br />kW AC CEC <br />(1) SOL-ARK 60K-3P-480V INVERTER <br />INSTALLATION MANUAL(S) TO WHICH THE EQUIPMENT HAS BEEN LISTED, INCLUDING <br />PROJECT DESCRIPTION: <br />A ROOF MOUNTED SOLAR SYSTEM TO BE INSTALLED ON THE COMMERCIAL BUILDING BUILDING IN SANTA ANA 92705 <br />THE ENERGY PRODUCED BY THE PV SYSTEM SHALL BE INTERCONNECTED WITH THE UTILITY GRID THROUGH THE EXISTING <br />ON SITE ELECTRICAL EQUIPMENT VIA A BACK-FED BREAKER IN AN EXISTING BREAKOUT PANEL <br />PV1.0 <br />(TITLE) <br />1 VICINITY MAP <br />SCALE: NTS <br />APPLICABLE CODES <br />2025 CALIFORNIA BUILDING CODE <br />2025 CALIFORNIA ELECTRIC CODE <br />2025 CALIFORNIA MECHANICAL CODE <br />2025 CALIFORNIA PLUMBING CODE <br />2025 CALIFORNIA FIRE CODE <br />2025 BUILDING ENERGY EFFICIENCY STANDARDS <br />ADDITIONALLY, CONFORM TO ALL LOCAL <br />ORDINANCES AND REQUIREMENTS <br />2025 SANTA ANA MUNI CODE <br />2025 CALIFORNIA GREEN BUILDING STANDARD <br />CODE <br />CALIFORNIA ENERGY CODE <br />CALIFORNIA EXISTING BUILDING CODE, WITH <br />LATEST REVISIONS <br />ARRAY LOCATION <br />INDEX <br />INDEX NO.DESCRIPTION <br />PV-1.0 TITLE PAGE <br />PV-1.1 CONSTRUCTION NOTES <br />PV-2.0 PLOT PLAN <br />PV-2.1 PV ROOF LAYOUT <br />PV-2.2 ATTACHMENT LAYOUT <br />PV-2.3 STRINGING LAYOUT <br />PV-3.0 ATTACHMENT DETAILS <br />PV-4.0 SINGLE LINE DIAGRAM <br />PV-5.0 SIGNAGE AND ELEVATION <br />PV-6.0 SPEC SHEETS <br />PV-6.1 SPEC SHEETS <br />PV-6.2 SPEC SHEETS <br />PV1.0 <br />(TITLE) <br />2 AERIAL MAP <br />SCALE: NTS ARRAY LOCATION <br />AHJ DESIGN NOTES <br />·ELECTRICAL EQUIPMENT WILL NOT <br />ENCROACH ZONING SET BACK. <br />·FIRE SET BACKS ARE MEASURED FROM <br />THE EXTERIOR LOAD BEARING WALL. <br />·LADDER ACCESS POINT SHALL NOT BE <br />MARKED ABOVE EXTERIOR WALL <br />OPENING. <br />·ALL WORK SHALL BE IN COMPLIANCE <br />WITH THE MOST CURRENT SANTA ANA <br />CODES <br />A. GENERAL <br />1. ALL WORK ON THIS PROJECT SHALL BE PERFORMED IN COMPLIANCE WITH ALL <br />LOCAL, STATE, AND FEDERAL CODES AND REGULATIONS, THE AHJ APPROVED <br />DRAWINGS, IFC DRAWINGS, INSTALLATION MANUALS, MATERIAL SPECIFICATION <br />SHEETS, AND ENVIRONMENTAL, HEALTH, SAFETY (EHS), AND QUALITY <br />REQUIREMENTS, AS APPLICABLE TO EACH CONTRACTORS SCOPE OF WORK. <br />2. CONTRACTORS', AND CONTRACTORS' EMPLOYEES, SHALL BE DULY LICENSED AND <br />CERTIFIED TO PERFORM THEIR SCOPE OF WORK REQUIRED TO BUILD AND <br />COMPLETE THIS PROJECT. <br />3. SEE DIAGRAMS AND DETAILS FOR SITE SPECIFIC INFORMATION. <br />4. THIS PROPOSED PHOTOVOLTAIC SYSTEM IS INTENDED TO CONNECT TO THE <br />EXISTING SITE OR FACILITY ELECTRICAL SYSTEM. THIS CONNECTION SHALL BE IN <br />COMPLIANCE WITH NEC ARTICLE 705.12 "POINT OF CONNECTION" (POC). <br />5. THIS PROPOSED PHOTOVOLTAIC SYSTEM IS INTENDED TO BE OPERATED IN <br />PARALLEL WITH THE UTILITY SERVICE PROVIDER. ANTI-ISLANDING PROTECTION IS A <br />REQUIREMENT OF UL 1741 AND IS INTENDED TO PREVENT THE OPERATION OF THE <br />SYSTEM WHEN THE UTILITY GRID IS NOT OPERATIONAL. <br />6. ALL ELECTRICAL COMPONENTS AND MATERIALS SHALL BE LISTED FOR THEIR <br />INTENDED USE AND INSTALLED PER MANUFACTURER SPECIFICATIONS. <br />7. ALL OUTDOOR EQUIPMENT SHALL MEET APPROPRIATE NEMA STANDARDS. <br />8. THE CONTRACTOR SHALL CHECK AND VERIFY ALL DIMENSIONS ON THE <br />DRAWINGS, AND LAYOUT ALL AREAS OF THE ARRAY PRIOR TO ANY INSTALLATION <br />WORK IN ORDER TO VERIFY THAT NO DISCREPANCIES, EXISTING CONDITIONS, <br />OBSTRUCTIONS OR SHADING EXIST. IF EITHER EXIST, CONTRACTOR SHALL SUBMIT A <br />RFI TO THE ENGINEER AND INSTALLATION WORK SHALL NOT COMMENCE UNTIL <br />FORMAL DIRECTION IS RECEIVED. <br />9. THE CONTRACTOR SHALL FURNISH AND INSTALL ALL WORK AS INDICATED ON THE <br />DRAWINGS AND SPECIFICATIONS. <br />10. THE CONTRACTOR SHALL BE RESPONSIBLE FOR LOCATING AND PROTECTING <br />ANY EXISTING UTILITIES AND EQUIPMENT ENCOUNTERED IN THE WORK AREAS. <br />11. THE CONTRACTOR SHALL COORDINATE ALL OPERATIONS WITH EQUIPMENT AND <br />INSTALLERS. <br />12. THE CONTRACTOR SHALL HAVE ALL SWITCHES AND BREAKERS IN THE "OFF" <br />POSITION PRIOR TO RECEIVING PERMISSION TO OPERATE WITH THE EXCEPTION OF <br />WHEN CONDUCTING APPROVED AND CODE COMPLIANT TESTING AND <br />COMMISSIONING. <br />13. PERMISSION TO OPERATE THE SYSTEM IS NOT AUTHORIZED UNTIL FINAL <br />INSPECTIONS AND APPROVALS ARE OBTAINED. <br />14. ALL MECHANICAL HARDWARE SHALL BE CORROSION RESISTANT APPROPRIATE <br />FOR SITE CONDITIONS. <br />15. ALL CONNECTIONS SHALL BE TORQUED PER MANUFACTURER SPECIFICATIONS. IF <br />SNUG TIGHT, THEN FOLLOW MANUFACTURER RECOMMENDATIONS. PROVIDE <br />PERMANENT TORQUE/WITNESS MARKS ON ALL STRUCTURAL, MECHANICAL, AND <br />ELECTRICAL TERMINATING HARDWARE WITH RED PERMANENT PAINT PEN FOR <br />INSPECTION. REMARK TO BE BLUE PERMANENT PAINT PEN. <br />B. PRE-CONSTRUCTION MEETING <br />1. NO CONTRACTOR SHALL BEGIN CONSTRUCTION WITHOUT FIRST ATTENDING A <br />PRE-CONSTRUCTION MEETING COVERING THE FOLLOWING TOPICS: <br />A. CONTRACTOR'S SCOPE OF WORK <br />B. SITE SPECIFIC EHS PLAN REVIEW <br />C. AHJ APPROVED DRAWINGS <br />D. IFC DRAWINGS REVIEW <br />E. SITE SPECIFIC QUALITY, TESTING, AND COMMISSIONING PLAN REVIEW <br />F. OTHER PROJECT SITE REQUIREMENTS <br />N <br />W <br />S <br />E <br />N <br />W <br />S <br />E <br />SCOPE OF WORK: <br />SOLAR MODULES DC SYSTEM: <br />(55) PV MODULES (LONGI LR5-72HBD-545M) <br />(TOTAL: 1512.68 SQ. FT.) <br />SYSTEM SIZE: (29.975) kW DC STC, (27.069) kW AC CEC <br />(55) AP SMART RSD-S-PLC RAPID SHUT DOWN DEVICES, UL LISTED, <br />CEC 690.12 AND SUNSPEC COMPLIANT <br />(1) AP SMART TRANSMITTER OUTDOOR KIT, NEMA 3R, UL LISTED <br />INVERTER AC SYSTEM: <br />(1) SOL-ARK 60K-3P-480V INVERTER, UL 1741 LISTED <br />(1) AP SMART PLC TRANSMITTER, RSD INITIATION DEVICE, <br />CEC690.15 AND SUNSPEC COMPLIANT <br />(1) NON-FUSED PV AC DISCONNECT,480/277V, 100A, UL LISTED, <br />NEMA 3R <br />ATTACHMENTS AND RAILS: <br />(86) ATTACHMENT POINTS @ 60" O.C. FIRE RATED AND TESTED <br />(1) IRONRIDGE XR100 RACKING SYSTEM <br />DESIGN CRITERIA <br />WIND SPEED: 94MPH <br />SNOW LOAD: 3PSF <br />EXPOSURE B <br />RISK CATEGORY II <br />HIGH DESIGN TEMPERATURE =35.7°C <br />LOW DESIGN TEMPERATURE = 4.4 °C <br />OCCUPANCY GROUP: <br />WAREHOUSE F-1 <br />ADMIN AREA: B <br />CONSTRUCTION TYPE: TYPE V-B (FULLY <br />SPRINKLERED)