2621 & 2621 3%4 S Birch St - Plan

Home Browse Search

mobility corp. SHEET TITLE SHEET NUMBER DRAWN BY: CHECKED BY: - JS 1452 EDINGER AVE. TUSTIN, CA 92780 PROJECT NO: AT&T SITE NO:CLL03413 10086996 90% CD'S FOR REVIEW EXPIRATION DATE: 06/30/2027 APPLICANT: CLL03413 MAIN / DYER 2621 & 2621 3/4 SOUTH BIRCH STREET SANTA ANA, CA 92707 JS03/17/2025A ENGINEER: A-3.2 PLANS PREPARED BY: DATE SIGNED: 12/11/2025 95% CD'S - CLIENT RLs RDL05/01/2025B 100% CD'S FOR SUBMITTAL DS12/11/20250 NEW ANTENNA PLAN 1 A-3.2 NE N E SESW W NW S NEW ANTENNA PLAN ANTENNA RF SCHEDULE FINAL RF SCHEDULE SECTOR ANTENNA MODEL NUMBER AZIMUTH RAD CENTER RRU MODEL NUMBER SURGE PROTECTION MODEL NUMBER A1 JAHH-65B-R3B-V3 100° 52'-0"RRUS 32 B30, RRUS E2 B29 (2) DC6-48-60-18-8C-EV A2 80010965 100° 52'-0" RRU 4478 B14 A3 AIR6472 B77G B77M 100°53'-6"INTEGRATED A4 TPA65R-BU6D 100° 52'-0"RRU 8843 B2/B66A, RRU 4449 B5/B12 B1 TPA65R-BU6D 210° 52'-0"8843 B2/B66A / 4449 B5/B12 (1) DC6-48-60-18-8C-EV B2 AIR6472 B77G B77M 210°53'-6"INTEGRATED B3 80010965 210° 52'-0" 4478 B14 B4 JAHH-65B-R3B-V3 210° 52'-0"RRUS-32 B30 / RRUS-E2 B29 (BOTTOM) C1 TPA65R-BU6D 330° 52'-0" 8843 B2/B66A / 4449 B5/B12 (1) DC6-48-60-18-8C-EV C2 AIR6472 B77G B77M 330°53'-6" INTEGRATED C3 80010965 330° 52'-0" 4478 B14 C4 JAHH-65B-R3B-V3 330° 52'-0"RRUS-32 B30 / RRUS-E2 B29 (BOTTOM) RFDS ID 35051 RFDS REV FINAL RFDS DATE 02/24/2025 A1 A2 A3 A4 C4 C3 C2 C1 B1 B2 B3 B4 2'-0" 2'-0" 3'-0" 3'-0" 2'-0" 2'-0" 2'-0" 2'-0" 3'-0" "A" SECTOR @ 100° "B" SE CTOR @ 210° "C" SE CTOR @ 330° NOTE: REMOVE ALL MDT BRACKETS (E) AT&T DC6-48-60-18-8C-EV SURGE PROTECTORS (4 TOTAL) (E) AT&T ANTENNAS (1 PER SECTORS B & C, 2 TOTAL) (E) AT&T ANTENNA RELOCATED (1 PER SECTOR A, 1 TOTAL) (E) AT&T ANTENNAS (1 PER SECTORS B & C, 2 TOTAL) (E) AT&T ANTENNAS (1 PER SECTORS "B" AND "C", 2 TOTAL) (E) HORIZONTAL MOUNTS RE-ALIGNED TO AZIMUTHS TO REMOVE SKEW, TYP. 3 (E) AT&T ANTENNA RELOCATED (1 PER SECTOR A, 1 TOTAL) (E) AT&T ANTENNA RELOCATED (1 PER SECTOR A, 1 TOTAL) (E) AT&T RRUS-32 B30 (1 PER SECTOR, 3 TOTAL) (E) AT&T RRU 4478 B14 RELOCATED (1 PER SECTOR, 3 TOTAL) (E) AT&T RRU 8843 B2/B66A RELOCATED (1 PER SECTOR, 3 TOTAL) (E) AT&T RRU 4449 B5/B12 RELOCATED (1 PER SECTOR, 3 TOTAL) NEW AT&T ANTENNAS (1 PER SECTOR, 3 TOTAL) 1 D-1 (E) MONOPOLE TARP RECOMMENDATIONS: 1) IF THE LOAD DIFFERS FROM THAT DESCRIBED IN TABLE 2 (PER DETAIL 4/D-1) OF THIS REPORT OR THE PROVISIONS OF THIS ANALYSIS ARE FOUND TO BE INVALID, ANOTHER STRUCTURAL ANALYSIS SHOULD BE PERFORMED. 2) THE MOUNT AND ITS CONNECTION HAVE SUFFICIENT CAPACITY TO CARRY THE EXISTING AND PROPOSED LOADING CONFIGURATION. IN ORDER FOR THE RESULTS OF THIS ANALYSIS TO BE VALID, THE MOUNT MODIFICATIONS LISTED BELOW MUST BE COMPLETED: a) REUSE EXISTING MOUNT PIPE(S) IN EMPTY ANTENNA POSITIONS, WHERE AN EXISTING ANTENNA ISLOCATED OR WHERE AN EXISTING ANTENNA IS BEING RELOCATED TO. RECONFIGURE ANTENNA MOUNT PIPE POSITIONS TO 4 POSITIONS PER SECTOR PER REFERENCED CONSTRUCTION DRAWINGS. b) REPLACE EXISTING ANTENNA MOUNT PIPES AT POSITION A3, B2 AND C2 WITH (3) SITE PRO P30120, 2.5 SCH.40 X 10’-0” MOUNT PIPES (CONMAT ITEM NO. ANT.16008) CONNECTED TO THE FACE HORIZONTAL WITH (3) SITE PRO SP219-H PIPE CROSS SUPPORT PLATES (CONMAT ITEM NO. ANT.55968) FOR PROPOSED ANTENNAS. c) INSTALL (6) SITE PRO P2120, 2.0 SCH.40 X 10’-0” MOUNT PIPES (CONMAT ITEM NO. ANT.55993 TO BE CONNECTION TO MOUNT SUPPORT ARMS WITH (3) SITE PRO BBPM-U UNIVERSAL BACK TO BACK PIPE MOUNT ASSEMBLIES (CONMAT ITEM NO. ANT.58819) FOR RRU AND SURGE MOUNTING. 3) RADIOS TO BE MOUNTED ON MOUNT ARMS INSTEAD OF FRONT HORIZONTAL TO BE REQUIRED DISTANCE FROM FACE OF MOUNT AND PIPES TO BE REMOVED FROM FRONT FACE. 4 ANTENNA PIPES TO BE DISTRIBUTED EQUALLY ACROSS MOUNT FACE NEW AT&T 2.5 SCH.40 X 10' LONG MOUNT PIPE (1 PER POSITION "A3", "B2", AND "C2", 3 TOTAL) NEW AT&T 2.0 SCH.40 X 10' LONG MOUNT PIPE (2 PER SECTOR, 6 TOTAL) 1'-0" TYP .