Laserfiche WebLink
6" <br /> <br />M <br />I <br />N <br />. <br />5/ <br />8 <br />" <br /> <br />- <br /> <br />2 <br />" <br />48 <br />" <br /> <br />M <br />I <br />N <br />. <br />60 <br />" <br /> <br />M <br />A <br />X <br />. <br />18 <br />" <br />MI <br />N <br />. <br />18" <br />MIN. <br />0.100" <br />0.300" <br />0. <br />1 <br />0 <br />0 <br />" <br />0. <br />3 <br />9 <br />5 <br />" <br /> <br />M <br />I <br />N <br />. <br />0. <br />4 <br />0 <br />0 <br />" <br /> <br />M <br />A <br />X <br />. <br />X <br />> <br /> <br />2 <br />7 <br />" <br />X <br />> <br /> <br />8 <br />0 <br />" <br />27 <br />" <br /> <br />- <br /> <br />8 <br />0 <br />" <br />27 <br />" <br /> <br />M <br />A <br />X <br />. <br />X > 12" <br />X > 12" <br />80 <br />" <br /> <br />M <br />I <br />N <br />. <br />X <br />> <br /> <br />8 <br />0 <br />" <br />80 <br />" <br /> <br />M <br />I <br />N <br />. <br />Ø 60" <br />MIN. <br />60" MIN. <br />60 <br />" <br /> <br />M <br />I <br />N <br />. <br />36" MIN. <br />24 <br />" <br /> <br />M <br />I <br />N <br />. <br />12" <br />MIN. <br />12" <br />MIN. <br />30 <br />" <br /> <br />M <br />I <br />N <br />. <br />48" MIN. <br />48 <br />" <br /> <br />M <br />I <br />N <br />. <br />30" MIN. <br />X <br />> <br /> <br />2 <br />4 <br />" <br />36" MIN. <br />60" MIN. <br />X <br />> <br /> <br />1 <br />5 <br />" <br />36 <br />" <br /> <br />M <br />I <br />N <br />. <br />30 <br />" <br /> <br />M <br />I <br />N <br />. <br />48" MIN. <br />15 <br />" <br />MI <br />N <br />. <br />48 <br />" <br /> <br />M <br />A <br />X <br />. <br />20" <br />MAX. <br />>20"-25" <br />MAX. <br />44 <br />" <br /> <br />M <br />A <br />X <br />. <br />48 <br />" <br /> <br />M <br />A <br />X <br />. <br />15 <br />" <br />MI <br />N <br />. <br />48 <br />" <br /> <br />M <br />A <br />X <br />. <br />34 <br />" <br />MA <br />X <br />. <br />46 <br />" <br /> <br />M <br />A <br />X <br />. <br />34 <br />" <br />MA <br />X <br />. <br />48 <br />" <br /> <br />M <br />A <br />X <br />. <br />36" <br />MIN. <br />36" <br />MIN. <br />42" <br />MIN. <br />42" <br />MIN. <br />48 <br />" <br /> <br />M <br />I <br />N <br />. <br />60 <br />" <br /> <br />M <br />I <br />N <br />. <br />36 <br />" <br /> <br />M <br />I <br />N <br />. <br />32 <br />" <br />MI <br />N <br />. <br />36 <br />" <br /> <br />M <br />I <br />N <br />. <br />32 <br />" <br />MI <br />N <br />. <br />24" <br />MAX. <br />24" <br />MAX. <br />48" <br />MIN. <br />30 <br />" <br />MI <br />N <br />. <br />30 <br />" <br />MI <br />N <br />. <br />27 <br />" <br />MI <br />N <br />. <br />27 <br />" <br />MI <br />N <br />. <br />29 <br />" <br />MI <br />N <br />. <br />44 <br />" <br />MA <br />X <br />. <br />15" MIN. <br />30" CLR <br />17" MIN. <br />27 <br />" <br />MI <br />N <br />. <br />29 <br />" <br /> <br />M <br />I <br />N <br />. <br />34 <br />" <br />MA <br />X <br />. <br />38 <br />" <br /> <br />- <br /> <br />4 <br />3 <br />" <br />27 <br />" <br />MI <br />N <br />. <br />36 <br />" <br /> <br />M <br />A <br />X <br />. <br />18" - 19" <br />MIN. <br />19"27 <br />" <br />MI <br />N <br />. <br />28 <br />" <br /> <br />- <br /> <br />3 <br />4 <br />" <br />40 <br />" <br /> <br />M <br />A <br />X <br />. <br />6' <br /> <br />- <br /> <br />2 <br />" <br /> <br />M <br />I <br />N <br />. <br />35 <br />" <br /> <br />M <br />A <br />X <br />. <br />6' <br /> <br />- <br /> <br />2 <br />" <br /> <br />M <br />I <br />N <br />. <br />40 <br />" <br /> <br />M <br />A <br />X <br />. <br />34 <br />" <br /> <br />M <br />A <br />X <br />. <br />18" <br />MIN. <br />20 <br />" <br />MA <br />X <br />. <br />54 <br />" <br /> <br />M <br />I <br />N <br />. <br />18" MIN. <br />60 <br />" <br /> <br />M <br />I <br />N <br />. <br />48 <br />" <br /> <br />M <br />I <br />N <br />. <br />48 <br />" <br /> <br />M <br />I <br />N <br />. <br />48" MIN. <br />48" MIN. <br />48" MIN. <br />32" MIN. 32" MIN. 32" MIN. <br />36" MIN.60 <br />" <br /> <br />M <br />I <br />N <br />. <br />48 <br />" <br /> <br />M <br />I <br />N <br />. <br />60 <br />" <br /> <br />M <br />I <br />N <br />. <br />44 <br />" <br /> <br />M <br />I <br />N <br />. <br /> <br />* <br />22" <br />MIN. <br />60 <br />" <br /> <br />M <br />I <br />N <br />. <br />24" <br />MIN. <br />24" MIN. <br />44 <br />" <br /> <br />M <br />I <br />N <br />. <br /> <br />* <br />HEIGHT OF RAISED <br />CHARACTERS <br />POSITION OF BRAILLE <br />HEIGHT OF TACTILE CHARACTERS ABOVE <br />FINISH FLOOR OR GROUND <br />CENTERED ON TACTILE <br />CHARACTERS <br />LOCATION OF TACTILE <br />SIGNS AT DOORS <br />PICTOGRAM FIELD <br />NOT IN <br />PICTOGRAM <br />FIELD <br />INTERNATIONAL SYMBOL <br />OF ACCESSIBILITY <br />MEN <br />AREA OF <br />REFUGE <br />AREA OF <br />REFUGE <br />AREA OF <br />REFUGELIBRARY <br />45° <br />INTERNATIONAL SYMBOL <br />OF ACCESS FOR HEARING <br />LOSS <br />3/ <br />8 <br />" <br /> <br />- <br />1/ <br />2 <br />" <br />3/ <br />8 <br />" <br />MI <br />N <br />. <br />SINGLE BRAILLE CELL <br />BLANK CELL SPACE <br />BETWEEN WORDS <br />RAISED DOT <br />NO RAISED DOT <br />0.059" MIN. TO 0.063" MAX. <br />DOT HEIGHT 0.025" MIN. TO 0.037" MAX. <br />MEASURED CENTER TO CENTER. <br />(B)(A) <br />LIMITS OF PROTRUDING <br />OBJECTS <br />POST MOUNTED PROTRUDING OBJECTS <br />VERTICAL CLEARANCE <br />EXCEPTION: HANDRAILS SHALL <br />BE PERMITTED TO PROTRUDE 4 <br />1/2 INCHES (115 MM) MAXIMUM. <br />MA <br />X <br />. <br />27 <br />" <br />POLE <br />VERTICAL <br />GUY <br />BRACE <br />GUY BRACES <br />4" MAX. <br /> 12" <br />MAX. <br /> 12" <br />MAX. <br />T-SHAPED TURNING SPACE <br />SIZE OF CLEAR FLOOR SPACE <br />CIRCULAR TURNING SPACE <br />MANEUVERING CLEARANCE IN AN <br />ALCOVE, FORWARD APPROACH <br />MANEUVERING CLEARANCE IN AN <br />ALCOVE, PARALLEL APPROACH <br />BASE <br />AR <br />M <br />AR <br />M <br />SIZE AND POSITION OF CLEAR FLOOR SPACE <br />(A) FORWARD(B) PARALLEL <br />DOMINANT DIRECTION OF TRAVEL <br />ELONGATED OPENINGS IN FLOOR OR GROUND SPACE <br />CARPET PILE HEIGHT VERTICAL CHANGE IN LEVEL BEVELED CHANGE IN LEVEL <br />2 <br />1 <br />NOTES: <br />1.FLOOR AND GROUND SURFACES SHALL BE STABLE, FIRM AND SLIP RESISTANT. <br />2.CARPET OR CARPET TILE SHALL BE SECURELY ATTACHED AND SHALL HAVE A FIRM CUSHION, PAD OR BACKING <br />OR NO CUSHION OR PAD. CARPET OR CARPET TILE SHALL HAVE A LEVEL LOOP, TEXTURED LOOP, LEVEL CUT PILE, <br />LEVEL CUT/UNCUT PILE TEXTURE. PILE HEIGHT SHALL COMPLY WITH CARPET PILE HEIGHT FIGURE BELOW. EXPOSED <br />EDGES OF CARPET SHALL BE FASTENED TO FLOOR SURFACES AND SHALL HAVE TRIM ON THE ENTIRE LENGTH OF <br />THE EXPOSED EDGE. CARPET EDGE SHALL COMPLY WITH CHANGE IN LEVEL FIGURES BELOW. <br />. <br />LONG DIMENSION <br />PERPENDICULAR TO <br />DOMINANT <br />DIRECTION OF <br />TRAVEL <br />1/ <br />2 <br />" <br />MA <br />X <br />. <br />1/ <br />2 <br />" <br />MA <br />X <br />. <br />1/ <br />4 <br />" <br /> <br />M <br />A <br />X <br />. <br />1/ <br />4 <br />" <br />1/ <br />4 <br />" <br />1/2" MAX. <br />(A)(B) <br />(A)(B) <br />UNOBSTRUCTED FORWARD REACH OBSTRUCTED HIGH FORWARD REACH <br />OBSTRUCTED HIGH <br />SIDE REACH <br />UNOBSTRUCTED HIGH <br />SIDE REACH <br />10" MAX.10" MAX. <br />>10"- <br />24" MAX. <br />(A) <br />180 DEGREE TURN <br />(B) <br />180 DEGREE TURN (EXCEPTION) <br />CLEAR WIDTH OF AN ACCESSIBLE ROUTE <br />CLEAR WIDTH AT TURN <br />X < 48"X < 48" <br />(A) <br />ELEVATION <br />(B) <br />PLAN <br />(A) <br />ELEVATION <br />(B) <br />PLAN <br />TOE CLEARANCE <br />KNEE CLEARANCE <br />(C) <br />ELEVATION @ LAVATORY <br />6" <br />MAX. <br />9" <br /> <br />M <br />I <br />N <br />. <br />17" -25" <br />25" <br />MAX. <br />8" <br />MIN. <br />9" <br /> <br />M <br />I <br />N <br />. <br />11" <br />MIN. <br />9" <br /> <br />M <br />I <br />N <br />. <br />11" <br />MIN. <br />8" <br />MIN. <br />EQUIPMENT <br />PERMITTED IN <br />SHADED AREA <br />FRONT & <br />SIDE <br />APPROACH <br />INSULATE EXPOSED <br />PIPES AND SURFACES <br />SPOUT OUTLETSPOUT OUTLET <br />MIRROR @ <br />LOCKER <br />ROOMS <br />WHEELCHAIR ACCESSIBLE <br />DRINKING FOUNTAIN <br />MIRROR NOT OVER <br />A LAVATORY <br />FIXED TABLE <br />OR COUNTER <br />STANDING <br />DRINKING <br />FOUNTAIN <br />URINAL <br />LAVATORY <br />ACCESSORIESMIRROR @ <br />LAVATORY <br />(*) OPERABLE PART LOCATED WITHIN <br />6" OF FRONT EDGE OF THE FOUNTAIN <br />(*) <br />FORWARD <br />APPROACH <br />17 <br />" <br /> <br />M <br />A <br />X <br />. <br />13 -1/2" MIN. <br />24" MAX. <br />9" <br /> <br />M <br />I <br />N <br />. <br /> 6" <br />MAX. <br /> 8" <br />MIN. <br /> 6" <br />MAX. <br /> 8" <br />MIN. <br />9" <br /> <br />M <br />I <br />N <br />. <br />15" MIN.5" MAX. <br />(A) <br />FRONT APPROACH, PULL SIDE <br />(*) IF BOTH CLOSER AND LATCH ARE PROVIDED <br />(E) <br />HINGE APPROACH, PULL SIDE <br />(F) (G*) <br />HINGE APPROACH, PUSH SIDE <br />(H) <br />LATCH APPROACH, PULL SIDE <br />(J) (K*) <br />LATCH APPROACH, PUSH SIDE <br />(B) (C*) <br />FRONT APPROACH, PUSH SIDE <br />(*) 48" MIN. IF CLOSER IS PROVIDED. <br />MANEUVERING CLEARANCE AT MANUAL SWINGING DOORS AND GATES <br />(A) <br />PULL SIDE <br />MANEUVERING CLEARANCE AT RECESSED DOORS AND GATES <br />(B) <br />PUSH SIDE <br />(C) <br />PUSH SIDE, DOOR PROVIDED <br />WITH BOTH CLOSER AND LATCH <br />(A) <br />HINGED DOOR <br />(B) <br />SLIDING DOOR <br />(C) <br />FOLDING <br />DOOR <br />CLEAR WIDTH OF DOORWAYS <br />(*) 48" MIN. IF BOTH CLOSER AND LATCH PROVIDED. <br />NOTES: <br />1.FLOOR OR GROUND SURFACE WITHIN REQUIRED MANEUVERING CLEARANCES SHALL COMPLY WITH [FLOOR OR <br />GROUND SURFACES & CHANGES IN LEVEL] DETAIL AND SHALL HAVE A SLOPE NOT STEEPER THAN 1:48. <br />CHANGES IN LEVEL ARE NOT PERMITTED AT DOOR LANDINGS. <br />2.THRESHOLDS, IF PROVIDED AT DOORWAYS SHALL BE 1/2" HIGH MAX. RAISED THRESHOLDS AND CHANGES IN <br />LEVEL AT DOORWAYS SHALL COMPLY WITH [FLOOR OR GROUND SURFACES & CHANGES IN LEVEL] DETAIL. <br />3.HANDLES, PULLS, LATCHES, LOCKS AND OTHER OPERABLE PARTS ON DOORS AND GATES SHALL BE OPERABLE <br />WITH ONE HAND AND SHALL NOT REQUIRE TIGHT GRASPING, PINCHING OR TWISTING OR THE WRIST. <br />4.THE FORCE REQUIRED TO ACTIVATE OPERABLE PARTS SHALL BE 5 LBS (22.5 N) MAX. <br />5.OPERABLE PARTS OF DOOR HARDWARE SHALL BE 34" MIN. AND 44" MAX. ABOVE THE FINISH FLOOR OR GROUND. <br />6.WHEN SLIDING DOORS ARE IN THE FULLY OPEN POSITION, OPERATING HARDWARE SHALL BE EXPOSED AND <br />USABLE FROM BOTH SIDES. <br />7.DOOR AND GATE CLOSERS SHALL BE ADJUSTED SO THAT FROM AN OPEN POSITION OF 90° THE TIME REQUIRED <br />TO MOVE THE DOOR TO A POSITION OF 12° FROM THE LATCH IS 5 SECONDS MIN. <br />8.DOOR AND GATE SPRING HINGES SHALL BE ADJUSTED SO THAT FROM THE OPEN POSITION OF 70° THE DOOR <br />OR GATE SHALL MOVE TO THE CLOSED POSITION IN 1.5 SECONDS MIN. <br />9.THE FORCE FOR PUSHING OR PULLING OPEN A DOOR OR GATE SHALL BE AS FOLLOWS: <br />9.1.INTERIOR HINGED DOORS AND GATES: 5 LBS (22.5 N) MAX. <br />9.2.SLIDING OR FOLDING DOORS: 5 LBS (22.5 N) MAX. <br />9.3.REQUIRED FIRE DOORS: THE MINIMUM OPENING FORCE ALLOWABLE BY THE APPROPRIATE ADMINISTRATIVE <br />AUTHORITY, NOT TO EXCEED 15 LBS (66.7N). <br />9.4.EXTERIOR HINGED DOORS: 5 LBS (22.5 N) MAX. <br />10.SWINGING DOOR AND GATE SURFACES WITHIN 10" OF THE FINISH FLOOR OR GROUND MEASURED VERTICALLY <br />SHALL HAVE A SMOOTH SURFACE ON THE PUSH SIDE EXTENDING THE FULL WIDTH OF THE DOOR OR GATE. <br />PARTS CREATING HORIZONTAL OR VERTICAL JOINTS IN THESE SURFACE SHALL BE WITHIN 1/16" OF THE SAME <br />PLANE AS THE OTHER AND BE FREE OF SHARP OR ABRASIVE EDGES. CAVITIES CREATED BY ADDED KICK <br />PLATES SHALL BE CAPPED. <br />11.WHERE AUTOMATIC AND POWER-ASSISTED DOORS AND GATES WITHOUT STANDBY POWER ARE PART OF A <br />MEANS OF EGRESS THE CLEAR BREAK OUT OPENING AT SWINGING OR SLIDING DOORS AND GATES SHALL BE <br />32" MIN. WHEN OPERATED IN EMERGENCY MODE. <br />90.00° <br />(A)(B) <br />(C) <br />TWO DOORS IN SERIES <br />DOORS IN SERIES AND GATES IN SERIES <br />X <br />> <br />8 <br />" <br />X <br />> <br />8 <br />" <br />X <br />> <br />8 <br />" <br />12" <br />MIN. <br />18" MIN.@ INTERIOR <br />24" MIN.@EXTERIOR <br />12" <br />MIN. * <br />18" MIN. <br />@ INTERIOR <br />DOOR <br />24" MIN. <br />@ EXTERIOR SIDE OF <br />EXTERIOR DOOR <br />EXIT <br />CORRESPONDING (GRADE 2) <br />BRAILLE PER LOCAL <br />ACCESSIBILITY STANDARDS <br />SANS-SERIF UPPERCASE <br />CHARACTERS, RAISED 1/32" PER <br />LOCAL APPLICABLE <br />ACCESSIBILITY STANDARDS <br />CHARACTERS & BACKGROUND <br />OF SIGNS TO BE NON-GLARE <br />FINISH AND TO CONTRAST WITH <br />EACH OTHER. (STANDARD <br />COLOR: WHITE ON BLUE <br />BACKGROUND, UNLESS <br />APPROVED OTHERWISE). COLOR <br />& CONTRAST OF SIGN TO BE <br />DISTINCTLY DIFFERENT THAN <br />COLOR & CONTRAST OF WALL <br />1/8" MAX. RADIUS ALL CORNERS <br />EXIT <br />ROUTE <br />* 135% MIN. <br />AND 170% <br />MAX. OF <br />CHARACTER <br />HEIGHT <br />CORRESPONDING (GRADE 2) <br />BRAILLE PER LOCAL <br />ACCESSIBILITY STANDARDS <br />SANS-SERIF UPPERCASE <br />CHARACTERS, RAISED 1/32" PER <br />LOCAL APPLICABLE <br />ACCESSIBILITY STANDARDS <br />CHARACTERS & BACKGROUND <br />OF SIGNS TO BE NON-GLARE <br />FINISH AND TO CONTRAST WITH <br />EACH OTHER. (STANDARD <br />COLOR: WHITE ON BLUE <br />BACKGROUND, UNLESS <br />APPROVED OTHERWISE). COLOR <br />& CONTRAST OF SIGN TO BE <br />DISTINCTLY DIFFERENT THAN <br />COLOR & CONTRAST OF WALL <br />N.T.S.10SIGNS <br />N.T.S.5BRAILLE MEASUREMENT <br />SCALE: 1/4" = 1'-0"1PROTRUDING OBJECTS <br />SCALE: 1/2" = 1'-0"3CLEAR FLOOR OR GROUND SPACE <br />N.T.S.4 <br />FLOOR OR GROUND SURFACES & CHANGES <br />IN LEVEL <br />SCALE: 1/4" = 1'-0"6REACH RANGES <br />SCALE: 1/4" = 1'-0"7CLEAR WIDTH <br />SCALE: 1/4" = 1'-0"8KNEE AND TOE CLEARANCE <br />SCALE: 1/4" = 1'-0"11MOUNTING HEIGHTS <br />SCALE: 1/4" = 1'-0"20DOORS, DOORWAYS & GATES <br />SCALE: 3" = 1'-0"12TACTILE "EXIT" SIGN <br />10 <br /> <br /> <br />E <br />d <br />e <br />l <br />m <br />a <br />n <br />Ir <br />v <br />i <br />n <br />e <br />, <br /> <br />C <br />A <br />, <br /> <br />9 <br />2 <br />6 <br />1 <br />8 <br />P <br />9 <br />4 <br />9 <br />. <br />6 <br />6 <br />0 <br />. <br />9 <br />1 <br />2 <br />8 <br /> <br /> <br /> <br />JOB NO.: <br />DRAWN BY.: <br />PA/PM: <br />SHEET <br />TH <br />E <br />S <br />E <br /> <br />D <br />R <br />A <br />W <br />I <br />N <br />G <br />S <br /> <br />A <br />N <br />D <br /> <br />S <br />P <br />E <br />C <br />I <br />F <br />I <br />C <br />A <br />T <br />I <br />O <br />N <br />S <br /> <br />A <br />R <br />E <br /> <br />T <br />H <br />E <br /> <br />P <br />R <br />O <br />P <br />E <br />R <br />T <br />Y <br /> <br />AN <br />D <br /> <br />C <br />O <br />P <br />Y <br />R <br />I <br />G <br />H <br />T <br /> <br />O <br />F <br /> <br />W <br />A <br />R <br />E <br /> <br />M <br />A <br />L <br />C <br />O <br />M <br />B <br /> <br />A <br />N <br />D <br /> <br />S <br />H <br />A <br />L <br />L <br /> <br />N <br />O <br />T <br /> <br />B <br />E <br /> <br />U <br />S <br />E <br />D <br /> O <br />N <br /> <br />A <br />N <br />Y <br /> <br />O <br />T <br />H <br />E <br />R <br /> <br />W <br />O <br />R <br />K <br /> <br />E <br />X <br />C <br />E <br />PT <br /> <br />B <br />Y <br /> <br />A <br />G <br />R <br />E <br />E <br />M <br />E <br />N <br />T <br /> <br />W <br />I <br />T <br />H <br /> <br />W <br />A <br />R <br />E <br /> <br />M <br />A <br />L <br />C <br />O <br />M <br />B <br />. <br /> <br />W <br />R <br />I <br />T <br />T <br />E <br />N <br /> <br />D <br />I <br />M <br />E <br />N <br />S <br />I <br />O <br />NS <br /> <br />S <br />H <br />A <br />L <br />L <br /> <br />T <br />A <br />K <br />E <br /> <br />P <br />R <br />E <br />C <br />E <br />D <br />E <br />N <br />C <br />E <br /> <br />O <br />V <br />E <br />R <br /> <br />S <br />C <br />A <br />L <br />E <br />D <br /> <br />D <br />I <br />M <br />E <br />N <br />S <br />I <br />O <br />N <br />S <br /> <br />A <br />N <br />D <br /> S <br />H <br />A <br />L <br />L <br /> <br />B <br />E <br /> <br />V <br />E <br />R <br />I <br />F <br />I <br />E <br />D <br /> <br />O <br />N <br /> <br />T <br />HE <br /> <br />J <br />O <br />B <br />S <br />I <br />T <br />E <br />. <br /> <br />A <br />N <br />Y <br /> <br />D <br />I <br />S <br />C <br />R <br />E <br />P <br />A <br />N <br />C <br />Y <br /> <br />S <br />H <br />A <br />L <br />L <br /> <br />B <br />E <br /> <br />B <br />R <br />O <br />U <br />G <br />H <br />T <br /> <br />T <br />O <br /> <br />T <br />H <br />E <br /> <br />N <br />O <br />T <br />IC <br />E <br /> <br />O <br />F <br /> <br />W <br />A <br />R <br />E <br /> <br />M <br />A <br />L <br />C <br />O <br />M <br />B <br /> <br />P <br />R <br />I <br />O <br />R <br /> <br />T <br />O <br /> <br />T <br />H <br />E <br /> <br />C <br />O <br />M <br />M <br />E <br />N <br />C <br />E <br />M <br />E <br />N <br />T <br /> <br />O <br />F <br /> <br />A <br />N <br />Y <br />W <br />O <br />R <br />K <br />CAUTION:IF THIS SHEET IS NOT 30"x42" IT IS A REDUCED PRINT <br />Au <br />t <br />o <br />d <br />e <br />s <br />k <br /> <br />D <br />o <br />c <br />s <br />: <br />/ <br />/ <br />I <br />R <br />V <br />2 <br />5 <br />- <br />6 <br />0 <br />1 <br />7 <br />- <br />0 <br />0 <br />_ <br />F <br />u <br />j <br />i <br /> <br />F <br />i <br />s <br />i <br /> <br />- <br />I <br />r <br />v <br />i <br />n <br />e <br /> <br />S <br />c <br />i <br /> <br />2 <br />5 <br />0 <br />1 <br /> <br />P <br />u <br />l <br />l <br />m <br />a <br />n <br />/ <br />6 <br />0 <br />1 <br />7 <br />_ <br />A <br />R <br />C <br />H <br />- <br />T <br />I <br />. <br />r <br />v <br />t <br />3/ <br />5 <br />/ <br />2 <br />0 <br />2 <br />6 <br /> <br />1 <br />1 <br />: <br />5 <br />1 <br />: <br />0 <br />1 <br /> <br />A <br />M <br />Approver <br />Studio-A <br />IRV25-6017 <br />AC <br />C <br />E <br />S <br />S <br />I <br />B <br />I <br />L <br />I <br />T <br />Y <br /> <br />D <br />E <br />T <br />A <br />I <br />L <br />S <br />I020 <br />FU <br />J <br />I <br />F <br />I <br />L <br />M <br /> <br />- <br />FI <br />S <br />I <br />25 <br />0 <br />1 <br /> <br />P <br />U <br />L <br />L <br />M <br />A <br />N <br /> <br />S <br />T <br /> <br />S <br />U <br />I <br />T <br />E <br /> <br />2 <br />0 <br />1 <br />SA <br />N <br />T <br />A <br /> <br />A <br />N <br />A <br />, <br /> <br />C <br />A <br /> <br />9 <br />2 <br />7 <br />0 <br />5 <br />SCALE: 3" = 1'-0"13TACTILE "EXIT ROUTE" SIGN <br />DA <br />T <br />E <br /> <br />R <br />E <br />M <br />A <br />R <br />K <br />S <br />08 <br />/ <br />2 <br />5 <br />/ <br />2 <br />0 <br />2 <br />5 <br /> <br />I <br />S <br />S <br />U <br />E <br />D <br /> <br />F <br />O <br />R <br /> <br />P <br />E <br />R <br />M <br />I <br />T <br />11 <br />/ <br />3 <br />0 <br />/ <br />2 <br />0 <br />2 <br />5 <br />11 <br />/ <br />3 <br />0 <br />/ <br />2 <br />0 <br />2 <br />7 <br />03 <br />/ <br />0 <br />5 <br />/ <br />2 <br />0 <br />2 <br />6 <br /> <br /> <br />- <br /> <br /> <br />P <br />L <br />A <br />N <br /> <br />C <br />H <br />E <br />C <br />K <br /> <br />R <br />E <br />S <br />U <br />B <br />M <br />I <br />T <br />T <br />A <br />L